船舶在恶劣海况下航行时,船体与波浪之间会发生剧烈的砰击现象,严重时会造成船体局部结构损坏或降低船舶总纵强度。随着工业技术的革新和海洋资源开发的需要,当代船舶不断向高速化和大型化发展,船舶发生砰击现象的概率也越来越高。开展结构砰击特性研究,准确地预报结构物的砰击载荷,对船舶航行和人员安全有重要的意义。本文基于水动力学软件Fine/Marine,建立水域-空气域-结构耦合的分析模型,对楔形结构的砰击特性进行数值仿真分析,并研究不同斜升角及不同入水速度对砰击载荷的影响。
While ships sail in rough sea condition,slamming will happen between the hull and waves,which could damage local structure and reduce the longitudinal strength in severe cases. With the innovation of industrial technology and the needs of developing marine resources,modern ships continuously develop toward high speed and large scale,so the probability of slamming becomes increasingly higher. It has important significance for the navigation of ships and personnel safety to study the slamming characteristics of structure and predict the slamming loads accurately. This paper set water-airstructure coupling models and analyzed the slamming characteristics of wedges by the numerical simulation based on FineMarine. Moreover,the influences caused by different deadrise angles and different entry speeds on slamming loads have been studied.
2016,38(6): 31-36 收稿日期：2015-11-05
DOI：10.3404/j.issn.1672-7619.2016.06.006
分类号：U661.4
基金项目：船舶预研支撑技术基金资助项目(14J1.3.1)
作者简介：彭丹丹(1990-),女,硕士研究生,研究方向为船舶与海洋结构物强度分析。
参考文献：
[1] DAIDOLA J C, MISHKEVICH V. Hydrodynamic impact on displacement ship hulls:An assessment of the state of the art, SSC-385A[RC]. Ship Structure Committee SSC-385A, 1995.
[2] BISHOP R E, PRICE W G, TAMARAI P. The failure of the Onomichi-maru[R]. Naval Architect, 1985, 3:141-142.
[3] SAMES P C, KAPSENBERG G K, COARRIGNAN P. Prediction of bow door loads in extreme wave conditions[C]//Royal institution of naval architects international conference, of design and operation for abnormal conditions Ⅱ:Prediction of bow door loads in extreme wave conditions. London, UK:Royal Institution of Naval Architects, London, UK, 2001.
[4] VON KáARMáAN T. The impact ofn seaplane floats during landing:NACA technical note 321[R]. Washington, DC:National Advisory Committee for Aeronautics, Technical Memorandum 1929, 321:2-8.
[5] WAGNER H. Über stoß-und gleitvorgänge an der oberfläche von flüssigkeiten[J]. ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift Für Angewandte Mathematik und Mechanik 1932, 12(4):192-215.
[6] OCHI M K, MOTTER L E. Prediction of slamming characteristics and hull responses for ship design[CJ].//Annual meeting of SNAMETransactions. New York:SNAME, 1973, 81:144-177.
[7] CHUANG S L. Experiments on flat-bottom slamming[J]. Journal of Ship Research, 1966, 10(1):10-27.
[8] CHUANG S L. Experiments on slamming of wedges-shaped bodies[J]. Journal of Ship Research, 1967, 112(3):190-198.
[9] CHUANG S L, MILES D T. Drop tests of cones to investigate the three-dimensional effects of slamming:, NSRDC Report 3453[R]. Fort Belvoir, VA:Defense Technical Information CenterNSRDC Report 3453, 1971.
[10] ZHAO R, FALTINSEN OM. Water entry of two-dimensional bodies[J]. Journal of Fluid Mechanics, 1993, 246:593-612.
[11] 陈震, 肖熙. 平底结构砰击压力的分布[J]. 中国造船, 2005, 46(4):97-103. CHEN Zhen, XIAO Xi. The distribution of slamming pressure on Flat-Bottom structure[J]. Ship Building of China, 2005, 46(4):97-103.
[12] 陈震. 海洋结构物入水砰击载荷与响应研究[D]. 上海:上海交通大学, 2005. CHEN Zhen. Study on slamming loads and responses of ocean structure[D]. Shanghai:Shanghai Jiaotong University, 2005.
[13] 陈震, 肖熙. 平底结构砰击压力峰值分析[J]. 上海交通大学学报, 2006, 40(6):983-987. CHEN Zhen, XIAO Xi. Analysis about the slamming pressure peak value on a flat-bottom structure[J]. Journal of Shanghai Jiaotong University, 2006, 40(6):983-987.
[14] 张于维, 王志东, 晋文菊, 等. 二维楔形体砰击载荷研究[J]. 中国舰船研究, 2010, 05(3):34-37, 46. ZHANG Yu-wei, WANG Zhi-dong, JIN Wen-ju, et alc. Numerical simulation on slamming load of two dimensional wedge-shaped section[J]. Chinese Journal of Ship Research, 2010, 5(3):34-37, 46.
[15] 王辉. 船体结构局部强度设计中的砰击载荷确定方法[J]. 中国造船, 2010, 51(2):68-77. WANG Hui. Slamming load determination in local structure design of ships[J]. Ship Building of China, 2010, 51(2):68-77.
[16] Lloyd's Register. Rules and regulations for the classification of naval ships[S]. London:Lloyd's Register, 2015:578-580.
[17] 中国船舶工业总公司中华人民共和国国家军用标准. 水面舰艇结构设计计算方法:GJB/Z 119-99[S]. 1999:23-25. China State Shipbuilding Corporation.GJB/Z 119-99. Method for structural design and strength calculation of naval surface ships:GJB/Z 119-99[S]. 1999:23-25.
