基于滑移网格方法，采用SST k-ω 湍流模型研究不同网格划分方式对带前置定子导管式推进器非定常性能的研究。首先基于相对参考坐标系法及滑移网格方法分别对推进器在定常与非定常下的性能进行数值预报，并与试验结果相比验证计算方法的可靠性。基于该方法研究整体网格划分方式与周期性网格对推力系数、扭矩系数与推进器各个方向上的非定常脉动力的影响。研究结果为进一步研究推进器非定常性能提供了参考。
Based on the sliding mesh method, the SST k-ω turbulent model was adopted to study the influence of different grid generation method on the unsteady performance of ducted propulsor with pre-stator. Firstly, based on the moving reference frame method and the sliding mesh method, the steady and unsteady performance was separately simulated. Then its numerical results were verified by comparing with experimental results. Furthermore, based on the mentioned method, the difference between the model in integral mesh and that in periodic mesh was compared, such as thrust coefficient, torque coefficient and unsteady force in x, y, z direction. The result provides a reference for further unsteady performance study of propulsor.
2016,38(7): 26-29 收稿日期：2016-04-20
DOI：10.3404/j.issn.1672-7619.2016.07.006
分类号：U664.3
作者简介：舒礼伟(1978-),男,工程师,主要从事船舶结构设计工作。
参考文献：
[1] 潘光, 胡斌, 王鹏, 等. 泵喷推进器定常水动力性能数值模拟[J]. 上海交通大学学报, 2013, 47(6):932-937.
[2] 谭廷寿, 贺伟. 螺旋桨非定常轴承力计算[J]. 船海工程, 2006, 35(2):42-46.
[3] 熊鹰. 非均匀流中螺旋桨空泡及脉动压力的数值和试验研究[D]. 武汉:武汉理工大学, 2002.
[4] 胡小菲, 黄振宇, 洪方文. 螺旋桨非定常力的黏性数值分析[J]. 水动力学研究与进展, 2009, 24(6):734-739.
[5] 沈海龙, 苏玉民. 船体黏性非均匀伴流场中螺旋桨非定常水动力性能预报研究[J]. 水动力学研究与进展, 2009, 24(2):232-241.
[6] 姚震球, 高慧, 杨春蕾. 基于滑移网格的带螺旋桨艇体尾流场数值分析方法[J]. 江苏科技大学学报(自然科学版), 2008, 22(2):15-20.
[7] HUGES M J, KINNAS S A. An analysis method for a ducted propeller with pre-swirl stator blades[C]//Proceedings of propeller/shafting's 91 symposium Virginia beach. Virgina, USA:SNAME, 1991.
