考虑管路系统功能需求，改变阀箱内部结构以及外形尺寸，建立 7 个方案的阀箱计算分析模型。通过利用数值计算方法，对阀箱出口处 3 个监测点的声压级进行计算。在此基础上，对各监测点计算结果进行对比分析，进而得到通海阀箱结构的声学最优模型。
By changing the internal structure and overall dimensions of the sea chest, seven sea chests calculation model were installed considering pipe system requirement. Using numerical calculation method, sound pressure level of three points of sea chests were calculated. On the basis of these, the calculation results of these points were compared and analyzed. In the end, the acoustic optimization model was got.
2016,38(7): 108-112 收稿日期：2015-12-04
DOI：10.3404/j.issn.1672-7619.2016.07.024
分类号：U664.84+
作者简介：李艳华(1984-),男,博士研究生,工程师,主要从事船舶振动噪声控制了开启。
参考文献：
[1] 刘少刚, 刘海丰, 舒海生, 等. 通海阀内流道优化降低流噪声[J]. 哈尔滨工程大学学报, 2013, 34(4):511-516. LIU Shao-gang, LIU Hai-feng, SHU Hai-sheng, et al. Flow noise reduction of outboard valves based on internal flow path optimization[J]. Journal of Harbin Engineering University, 2013, 34(4):511-516.
[2] 江山, 张京伟, 吴崇健, 等. 通海阀内流场的三维数值模拟[J]. 中国舰船研究, 2009, 4(2):37-41. JIANG Shan, ZHANG Jing-wei, WU Chong-jian, et al. Three dimensional numerical simulation of flow fields inside sea suction valve[J]. Chinese Journal of Ship Research, 2009, 4(2):37-41.
[3] 戴绍仕, 姚熊亮, 杨国晶, 等. 格栅对海底阀箱剪切层处水动力特性的影响分析[J]. 振动与冲击, 2010, 29(4):207-212, 225. DAI Shao-shi, YAO Xiong-liang, YANG Guo-jing, et al. Effect of grids on hydrodynamic characteristics of a suction box at shear layer[J]. Journal of Vibration and Shock, 2010, 29(4):207-212, 225.
[4] 郝金玉. 船舶海底阀箱水动力特性数值模拟研究[J]. 舰船工程研究, 2011(2):5-8. HAO Jin-yu. Numerical simulation research on hydrodynamic characteristics of marine valve box[J]. Ship Engineering Research, 2011(2):5-8.
[5] 杨泽滨. 排水型高速船通海阀箱及其附件设计要点[J]. 广东造船, 2010, 29(5):37-39. YANG Ze-bin. Design of sea chest and its accessories for high-speed displacement vessels[J]. Guangdong Shipbuilding, 2010, 29(5):37-39.
