使用Abaqus软件建立船舶轴系中间轴的模型，通过有限元方法计算轴法兰过渡处的应力集中系数，分析应力集中系数与轴系扭振计算结果之间的关系。相比于单圆弧过渡，三段式圆弧过渡将应力集中系数减小了20%，持续运转扭振许用应力提高了38%，瞬时运转扭振许用应力提高了17%。运用有限元分析方法检验校核了船舶轴系设计的合理性。
The intermediate shaft was modeled by ABAQUS and the stress concentration factor was calculated with method of finite element analysis. And it analyzed the relationship between the stress concentration factor and the torsional vibration calculation. Compared to single radii transition, Multi radii transition reduced the stress concentration factor by 20 percent. meanwhile, the torsional vibration allowable stress value in continuous operation mode was increased by 38 percent and that in instantaneous operation mode was increased by 17 percent. The finite element analysis checked the rationality of the marine shaft design.
2016,38(9): 87-91 收稿日期：2016-2-25
DOI：10.3404/j.issn.1672-7619.2016.09.017
分类号：U664.121
作者简介：屠星星(1990-),男,硕士,助理工程师,从事轮机设计工作。
参考文献：
[1] 张玉峰, 朱以文, 丁宇明. 有限元分析系统Abaqus中的特征技术[J]. 工程图学学报, 2006, 27(5): 142-148.ZHANG Yu-feng, ZHU Yi-wen, DING Yu-ming. Feature technology of finite element analysis system Abaqus[J]. Journal of Engineering Graphics, 2006, 27(5): 142-148.
[2] 雷继军, 韩致信. 异形截面轴肩的应力集中特征[J]. 兰州理工大学学报, 2010, 36(4): 44-47.LEI Ji-jun, HAN Zhi-xin. Stress concentration character at shaft shoulder with abnormal cross-section[J]. Journal of Lanzhou University of Technology, 2010, 36(4): 44-47.
[3] 陈科, 殷磊, 陈振华. 万向十字轴轴根过渡结构的优化设计和分析[J]. 中国机械工程, 2014, 25(23): 3155-3159.CHEN Ke, YIN Lei, CHEN Zhen-hua. Optimization and analysis of transition curves for roots of universal cross shaft[J]. China Mechanical Engineering, 2014, 25(23): 3155-3159.
[4] 吴凤林, 任家骏. 轴肩过渡曲线形状设计研究[J]. 中国机械工程, 1998, 9(9): 15-16.WU Feng-lin, REN Jia-jun. Research on shape design of shoulder transition curve[J]. China Mechanical Engineering, 1998, 9(9): 15-16.
[5] NISITANI H, NODA N A. Stress concentration of a cylindrical bar with a V-shaped circumferential groove under torsion, tension or bending[J]. Engineering Fracture Mechanics, 1984, 20(5/6): 743-766.
[6] Det Norske Veritas AS. Calculation of shafts in marine applications[R]. Classification Notes No. 41.4. Norway: Norway Classification Society Press, 2013: 18-19.
[7] 符芮三. ABAQUS与PERFORM-3D在弹塑性时程分析中的应用及对比研究[D]. 重庆: 重庆大学, 2014.FU Rui-san. The application and comparation of ABAQUS and PERFORM 3D in elastic-plastic time history analysis[D]. Chongqing: Chongqing University, 2014.
[8] 中国船级社. 钢质海船入级规范[M]. 北京: 人民交通育出版社, 2014: 257-258.China Classification Society. Rules for classification of sea-going steel ships[M]. Beijing: China Communications Press, 2014: 257-258.
