自吸离心泵的振动噪声由多种因素造成，其中泵的结构和刚度是主要因素。通过对自吸离心泵的主要结构及装配体进行模态分析，可以获得该泵自身的固有频率和模态振型，从而找到其结构及装配体的薄弱部位，为结构优化调整打下基础。以UG建立的船用某型自吸离心泵三维实体模型为基础，通过HyperMesh和Ansys Mechanical APDL，完成了该泵从网格划分到计算模态分析全过程，并对计算结果进行分析。计算和分析结果表明，该泵结构上存在薄弱之处，必须进行有针对性的优化。
The vibration and noise of a self-priming centrifugal pump is caused by many factors, the structure and rigidity of the pump are the two main factors. By the modal analysis of the main structure and assembly of self-priming centrifugal pump we can get its own natural frequencies and mode shapes, and find the weaknesses of the structure and assembly, lay the foundation for structural optimization and adjustment. Based on the 3D model of a marine self-priming centrifugal pump established by UG, this paper completed the whole process from mesh to modal analysis by the software of HyperMesh and Ansys Mechanical APDL, and then analyzed the results. Calculation and analysis results show that there are vulnerabilities in the pump, and measures must be taken to optimize the structure targeted.
2016,38(11): 84-86 收稿日期：2016-03-02
DOI：10.3404/j.issn.1672-7619.2016.11.017
分类号：TH317
作者简介：周朝晖(1963-),男,副教授,主要从事离心泵、喷水推进等方面的研究。
参考文献：
[1] 全国化工设备设计技术中心站机泵技术委员会. 工业泵选用手册[M]. 北京: 化学工业出版社, 2010: 154-157.
[2] 黄国富, 常煜, 张海民. 基于CFD的船用离心泵流体动力振动噪声源分析[J]. 水泵技术, 2008(3): 20-24, 33.
[3] 刘君, 袁建平. 带预应力的高速离心泵转子模态分析[J]. 中国农村水利水电, 2014(2): 117-121.
[4] 付建国. 多级离心泵流固耦合动力特性分析[D]. 扬州: 扬州大学, 2014.
[5] 左能文. 钢丝缠绕型陶瓷压砖机主体机架的有限元分析与结构优化[D]. 南昌: 华东交通大学, 2012.ZUO Neng-wen. Finite element analysis and structural optimization of steel wire-wound ceramic press frame[D]. Nanchang: East China Jiaotong University, 2012.
[6] 杨凯, 朱春华, 陈明. 模态试验架的动态特性研究[J]. 中国制造业信息化, 2008(24): 52-53.YANG Kai, ZHU Chun-hua, CHEN Ming. Study on dynamic characteristics of modal test frame[J]. Manufacture Information Engineering of China, 2008(24): 52-53.
[7] 陈艳锋, 吴新跃, 王基. 船用泵振动模态计算分析研究[J]. 机电产品开发与创新, 2005, 18(2): 60-62.CHEN Yan-feng, WU Xin-yue, WANG Ji. Study on the vibration modal analysis of a pump[J]. Development & Innovation of Machinery & Electrical Products, 2005, 18(2): 60-62.
