利用大型通用有限元分析软件MSC.patran/Nastran，以某船用柴油机机座结构为算例，并且结合类似研究中对约束条件的讨论，进行初步的线性无阻尼模态分析。在船用柴油机机座的模态分析中常存在的局部模态无法辨识，整体模态振型无法提取的实际应用问题，因而本文分别提出模态有效质量系数以及“虚拟梁”2种技巧。通过有效质量系数来进行模态结果的筛选得出具有主要影响作用的主模态，从而剔除了局部模态。通过虚拟梁的方法提取由于局部变形而无法观察到的结构整体振型。在此基础上以期能够更加深入的进行有限元模态分析，有效地将计算数据提取并加以利用。该算例得出的计算结果以及计算方法还能扩展为同类型的机座结构进行针对性的动力学优化计算。
A basement structure of a marine diesel engine is taken as a simulation example, through the MSC.Patran/Nastran, a common FEM software, to perform a basic non-damping linear modal analysis, in which the constraint condition are compared with other similar articles. However, in modal analysis of a main engine basement structure in a vessel, there are problems that local modals can't be identified and whole modal vector can't be showed. Therefore, two skills named as modal effective mass fraction and "fake beam" are proposed. The modal effective mass fraction are used to filter all modal results to get the main modal which imposes major influence on whole structure's response, meanwhile the local modal can be removed. The "fake beam" are used to extract the whole structure's deformation which is usually invisible due to the local modal's deformation. Subsequently, more detailed analysis can be performed, while the calculating data and methods in this case can be utilized efficiently to optimize the dynamic character of the structure which is similar as the main engine basement.
2017,39(2): 83-87 收稿日期：2016-07-14
DOI：10.3404/j.issn.1672-7619.2017.02.017
分类号：U663.7
基金项目：上海海事大学研究生创新基金资助项目（YXR2015148）
作者简介：顾天恩(1991-),男,硕士研究生,研究方向为船舶动力系统。
参考文献：
[1] 曹树谦, 张文德, 萧龙翔. 振动结构模态分析——理论, 试验与应用[M]. 天津:天津大学出版社, 2014.
[2] ROBERT E C(美). 试验结构动力学[M]. 北京:清华大学出版社, 2012.
[3] 长送昭男(日). 声振模态分析与控制[M]. 北京:科学出版社, 2014.
[4] 田利思. MSC NASTRAN动力分析指南[M]. 北京:中国水利水电出版社, 2012.
[5] 龙英, 腾召金, 赵福水. 有限元模态分析现状与发展趋势[J]. 湖南农机, 2009, 4(36):27-28.LONG Ying, TENG Zhao-jin, ZHAO Fu-shui. The present status and development trends of finite element modal analysis[J]. Hunan Agricultural Machinery, 2009, 4(36):27-28.
[6] 曹妍妍, 赵登峰, 有限元模态分析理论及其应用[J]. 机械工程与自动化, 2007, 140(1):73-74.CAO Yan-yan, ZHAO Deng-feng, Finite element modal analysis theory and its application[J]. Mechanical Engineering & Automation, 2007, 140(1):73-74.
[7] 刘向东, 庞福振. 船用主机基座系统的振动特性研究[J]. 造船技术, 2009(3):35-40.LIU Xiang-dong, PANG Fu-zheng. Study on vibration characteristics of main engine system for ship[J]. Shipbuilding Technology, 2009(3):35-40.
[8] 艾松树, 周照耀, 邵明. 特种车辆发动机支架模态分析[J]. 现代制造工程, 2004(10):42-44.AI Song-shu, ZHOU Zhao-yao, SHAO Ming. Modal analysis of special vehicle engine support[J]. Modern Manufacture Engineering, 2004(10):42-44.
[9] 刘金玲, 金涛, 马宇山. 柴油机整体有限元模态分析[J]. 机械工程师, 2009(8):84-85.LIU Jin-lin, JIN Tao, MA Yu-shan. The holistic finite element model analysis of diesel engine[J]. Mechanical Engineer, 2009(8):84-85.
[10] 梅德庆, 280MW汽轮机基座振动特性的模型试验[J]. 动力工程, 2005(5):652-655.MEI De-qing. Research on vibration characteristics of a 280 MW steam turbine-generator foundation by model testing[J]. Power Engineering, 2005(5):652-655.
[11] 张洋, 数控铣床工作台预紧与其动态特性关系的研究[D]. 沈阳:沈阳工业大学, 2011.
[12] 郭云春, 螺栓连接镁车架的有限元分析与结构优化[D]. 重庆:重庆大学, 2012.
[13] 赖兴华. 露天旋转钻机底架有限元分析及改进研究[D]. 昆明:昆明理工大学, 2010.LAI Xing-hua. Finite element analysis and Improvement research for chassis of the open-air rotary drilling rig[D]. Kunming:Kunming University of Acience and Technology, 2010.
[14] MSC, Dynamic analysis user's guide 2014, www.mscsoftware.com, 2014
