以舰船舱室钢板为研究对象，利用动力分析有限元程序Ls-dyan，分别采用壳单元和实体单元2种建模方式对爆炸荷载作用下钢板的动力响应进行数值模拟研究。对比钢板的应力分布云图、中线上各点最大位移曲线图，发现2种方法计算结果与试验值大致吻合，采用壳单元建模在保证计算结果准确性的前提下可以大大提高计算效率。如何正确地选择单元进行分析是数值模拟很重要的一个环节，通过对壳单元和实体单元计算结果的初步对比，为舰船舱室数值模拟研究如何选取单元提供参考。
Take the steel plates of warship cabins as research objects, numerical simulation study on the response of the quadrangular steel plates subjected to blast loads is presented by dynamic analysis finite element procedure Ls-dyan3d, using modeling methods of shell element and solid element respectively. Comparing pressure distribution cloud picture and each point of midcourt line miximum displacement curve graph, it can be found that transformation trend of steel plates is similar for different thickness while each point of midcourt line miximum displacement is discriminating. However results from two methods are alike for equal thickness. Meanwhile, it can improve calculative effciency. How to choose which kind of element types correctly to analysis is an important link. Through the preliminary contrast study of calculative results of shell element and solid element, it can provide reference for choosing element type in warship cabins numerical simulation.
2017,39(3): 18-22 收稿日期：2016-09-18
DOI：10.3404/j.issn.1672-7619.2017.03.004
分类号：TJ03
基金项目：国家自然科学基金资助项目（11502258）
作者简介：朱俊杰(1991-),女,硕士研究生,研究方向为结构冲击与爆炸
*：陶俊林(1972-),男,博士,教授,E-mail:junlintao@126.com
参考文献：
[1] 陈攀, 刘志忠. 舱室内爆冲击波载荷特性及影响因素[J]. 舰船科学技术, 2016, 38(2):43-48.CHEN Pan, LIU Zhi-zhong. Research on loading of explosive and influencing factors inside closed cabin[J]. Ship Science and Technology, 2016, 38(2):43-48.
[2] 朱建方, 王伟力, 曾亮. 舰艇舱室内爆毁伤的建模与仿真分析[J]. 系统仿真学报, 2009, 21(22):7066-7068.
[3] 杜志鹏, 李晓彬, 夏利娟, 等. 反舰导弹攻击舰船舷侧防护结构过程数值仿真[J]. 哈尔滨工程大学学报, 2006. 27(4):484-487.
[4] LONGDON G S, CHUNG Ki Y S, NURICK G N. Experimental and numercial studiesion the response of quadrangular stiffened plates. Part I:subjected to uniform blast load[J]. In-ternational Journal of Impact Engineering. 2005, (31):55-83.
[5] LONGDON G S, CHUNG Ki Y S, NURICK G N. Experimental and numercial studiesion the response of quadrangular stiffened plates. Part II:localist blast loading[J]. International Journal of Impact Engineering. 2005, (31):85-11.
[6] 徐新光. 梁单元和实体单元模拟框架结构的差异性比较[J]. 四川建材, 2014, 40(5):46-48.
[7] ANSYS工程结构数值分析[M]. 北京. 人民交通出版社, 2012:11-13.
[8] ANSYS/LSDYNA在爆炸与冲击领域内的工程应用[M]. 北京:中国建筑工业出版社, 2011.
[9] 李帆. 船舰室内爆炸破坏的数值模拟和试验研究[D]. 北京:国防科技大学, 2012.
