本文采用基于设计波法的直接计算法对270000 m3的浮式液化天然气船FLNG进行整船结构强度评估。根据FLNG具体的结构形式和数值分析的最终目的将该装置的实际结构简化，选用适当类型的单元对该装置的结构进行离散而得到FLNG的整船有限元模型。基于三维势流理论并利用中国南海波浪散布图对FLNG进行水动力分析，得到了FLNG在典型装载工况下的波浪压力分布及设计波参数。通过把FLNG承受的波浪压力、惯性力、静水压力与重力等载荷分布到有限元模型上，得到FLNG在典型装载工况下全船的应力水平、应力分布和变形情况。该数值分析结果可在FLNG的初级设计阶段为船体结构强度分析提供有效分析依据，并为FLNG上部模块的设计开发提供船体变形参考。
The overall strength assessment of a 270 000 m3 FLNG (Floating Liquid Natural Gas) was carried out based on design wave approach. Simplified FLNG's structure based on the ship's structure form and numerical analysis's purpose, building a finite element model of FLNG by choose appropriate unit. Hydrodynamic analysis were calculated based on 3-D potential theory and long term prediction using South China Sea scatter diagram, the design wave parameters and hydrodynamic pressure distribution were determined for typical load condition of FLNG. And then loaded hydrodynamic pressure, inertial force, hydrostatic pressure, gravity on the model, obtained stress level, stress distribution, deformation of the hull structure at last. The results of numerical analysis can providing effective basis for overall strength assessment of FLNG at the stage of primary design, it also can providing reference of hull deformation for topside design.
2017,39(5): 32-37 收稿日期：2016-08-29
DOI：10.3404/j.issn.1672-7619.2017.05.007
分类号：U663.2
基金项目：国家863计划资助项目（2013AA09A216）
作者简介：阚涛(1991-),男,硕士研究生,主要从事船舶与海洋结构物设计制造的研究
参考文献：
[1] 薄玉宝. 浮式液化天然气(FLNG)技术在中国海上开发应用探讨[J]. 中国海洋平台, 2013, 28(3):1-5. BO Yu-bao. Floating liquefied natural gas (FLNG) technology in China offshore development application to Discussion[J]. China Offshore Platform, 2013, 28(3):1-5.
[2] 杜忠仁. 薄膜型液化天然气船船体结构设计中几个特殊问题[J]. 上海造船, 2002(2):9-12. DU Zhong-ren. Some special problems in hull construction design of membrance tank LNG ships[J]. Shanghai Shipbuilding, 2002(2):9-12.
[3] 谢志添, 杨建民, 胡志强, 等. 浮式液化天然气储存装置单点系泊水动力特性分析[J]. 中国海上油气, 2015, 27(1):96-101. XIE Zhi-tian, YANG Jian-min, HU Zhi-qiang, et al. Single point mooring hydrodynamic characteristics analysis of FLNG[J]. China Offshore Oil and Gas, 2015, 27(1):96-101.
[4] 袁红良. 147000 m3薄膜型LNG(液化天然气)船船型开发[J]. 船舶, 2006(6):10-13. YUAN Hong-liang. Development of ship type of a 14700 m3 membrane LNG tanker[J]. Ship & Boat, 2006(6):10-13.
[5] 贺双元, 吴卫国, 甘进. 液化天然气船船体极限强度分析[J]. 中国舰船研究, 2008(6):30-33. HE Shuang-yuan, WU Wei-guo, GAN Jin. Analysis on the ultimate strength of LNG ship[J]. Chinese Journal of Ship Reaearch, 2008(6):30-33.
[6] 刘敬喜, 唐永生, 赵耀, 等. 基于直接计算法的LNG船整船强度评估[J]. 船舶工程, 2010(4):5-8. LIU Jing-xi, TANG Yong-sheng, ZHAO Yao, et al. Overall strength assessment of LNG ship structures based on the direct computing method[J]. Ship Engineering, 2010(4):5-8.
[7] ZHU T, SHIGEMI T. Design loads used for direct strength assessment of merchant ship structures[J]. Journal of Offshore Mechanics & Arctic Engineering, 2007, 129(2):120-130.
[8] SHIGEMI T, ZHU T. Extensive study on the design loads used for strength assessment of tanker and bulk carrier structures[J]. Journal of Marine Science & Technology, 2004, 9(3):95-108.
[9] ⅡJIMA K, SHIGEMI T, MIYAKE R, et al. A practical method for torsional strength assessment of container ship structures[J]. Marine Structures. 2004, 17(5):355-384.
[10] 朱胜昌, 陈庆强, 江南. 大型集装箱船总纵强度计算方法研究[J]. 船舶力学, 2001, 5(2):34-42. ZHU Sheng-chang, CHEN Qing-qiang, JIANG Nan. Research on the calculation method of longitudinal strength of large container ship[J]. Journal of Ship Mechanics, 2001, 5(2):34-42.
[11] 白建伟, 李润培, 顾永宁, 等. 集装箱船整船有限元结构分析[D]. 船舶工程, 2000(5):8-11. BAI Jian-wei, LI Run-pei, GU Yong-ning, et al. Structural strength analysis of container vessel using entire ship FE model[J]. Ship Engineering, 2000(5):8-11.
