对潜艇耐压液舱的研究现状进行综述。通过分析外置式耐压液舱的研究方法和途径，展望内置式耐压液舱结构设计、计算、优化等方向研究的发展趋势。
The study of the submarine pressure tank status are reviewed. By analyzing the type research methods of outer pressure tank, it describes the inner pressure tank's developing tendency in the aspect of structure design, calculation and researching optimization direction, etc.
2018,(): 1-8 收稿日期：2016-09-22
DOI：10.3404/j.issn.1672-7649.2018.01.001
分类号：U661.42
基金项目：国家部委基金资助项目（1010302010202）
作者简介：吴春芳(1977-),女,博士,副教授,研究方向为舰船结构强度
参考文献：
[1] 马运义. 对潜艇采用单、双壳体结构的分析意见及建议[J]. 舰船科学技术, 2001(6): 1-9.
MA Yun-yi. Opinions and suggestions on the analysis of the submarine with mono and double shell structure [J]. Ship Science and Technology, 2001(6): 1-9.
[2] 俞铭华, 王自力, 李良碧, 等. 大深度载人潜水器耐压壳结构研究进展[J]. 华东船舶工业学院学报(自然科学版), 2004, 18(4): 1-6.
YU Ming-hua, WANG Zi-li, LI Liang-bi, et al. Development of research on the pressure shell structure of deep manned submersible[J]. Journal of East China Shipbuilding Institute(Natural Science Edition), 2004, 18(4): 1-6.
[3] RONA P. Deep-diving manned research submersibles[J]. MTS Journal, 1999, (4): 13-25.
[4] BOOTE D, MASCIA D. On the nonlinear analysis methodologies for thin spherical shell under external pressure with different finite-element codes[J]. Journal of Ship Research, 1989, 33(4): 318-325.
[5] 谢祚水, 梅利元. 潜艇外部耐压液舱结构型式研究[J]. 华东船舶工业学院学报, 1998, 12(6): 1-6.
XIE Zuo-shui, MEI Li-yuan. Research on the structural forms of outer pressure tank of submarine[J]. Journal of East China Shipbuilding Institute, 1998, 12(6): 1-6.
[6] 谢祚水, 梅利元. 潜艇耐压液舱结构几种应力近似解析法的简要评述[J]. 华东船舶工业学院学报, 1999, 13(1): 39-44.
XIE Zuo-shui, MEI Li-yuan. Brief discussion of approximate analysis methods for stress of pressure tank structure of submarine[J]. Journal of East China Shipbuilding Institute, 1999, 13(1): 39-44.
[7] 杨正忠, 陈良增, 张炜. 潜艇耐压船体在隔壁附近的应力[J]. 舰船科学技术, 1985(6): 37-46, 55.
YANG Zheng-zhong, CHEN Liang-zeng, ZHANG Wei. The submarine pressure hull stress near the bulkhead[J]. Ship Science and Technology, 1985(6): 37-46, 55.
[8] 徐秉汉, 朱邦俊. 现代潜艇结构强度的理论与试验[M]. 北京: 国防工业出版社, 2007: 181-225.
[9] 胡刚义. 潜艇耐压液舱区耐压船体计算方法的探讨[J]. 舰船科学技术, 1997(7): 30-32.
HU Gang-yi. Discussion about the calculation method of pressure hull for submarine pressure tank[J]. Ship Science and Technology, 1997(7): 30-32.
[10] 朱邦俊, 徐秉汉, 译. 潜艇耐压船体专用结构静强度计算规则——耐压液舱强度和稳定性计算方法[M]. 702所, 1995.
[11] 黄加强, 贺小型. 带纵骨实肋板式耐压液舱壳板强度计算方法研究[J]. 中国造船, 1996(3): 77-86.
HUANG Jia-qiang, HE Xiao-xing. Study on the calculation method of the strength of pressure tank with longitudinal frames[J]. Shipbuilding of China, 1996(3): 77-86.
[12] 王晓天, 梁学先, 崔洪斌. 潜艇耐压液舱壳板强度的计算方法研究[J]. 哈尔滨工程大学学报, 2006, 27(5): 690-692.
WANG Xiao-tian, LIANG Xue-xian, CUI Hong-bin. On the computing method of submarine's pressure tank shell strength [J]. Journal of Harbin Engineering University, 2006, 27(5): 690-692.
[13] 罗斌, 陈强, 徐云椿. 潜艇纵骨式全实肋板耐压液舱壳板强度计算方法研究[J]. 中国造船, 1999, 145(2): 74-80.
LUO bin, CHEN Qiang, XU Yun-chun. Study on the calculation method of the strength of the submarine longitudinal full-frame pressure shell[J]. Shipbuilding of China, 1999, 145(2): 74-80.
[14] 许辑平. 潜艇强度[M]. 北京: 国防工业出版社, 1980.
[15] 朱邦俊, 葛沈瑜, 王丹. 潜艇耐压船体初挠度的应力分析及允许偏差的讨论[C]//纪念徐秉汉院士船舶与海洋结构力学学术会议论文集, 2011, 33-41.
ZHU Bang-jun, GE Shen-yu, WANG Dan. Stress analysis of submarine pressure hull structures with initial deflection and discussion of allowable deflection[C]//Commemorating Xu Binghan Academician Ship and Marine Structural Mechanics Conference Proceedings, 2011, 33-41.
[16] 朱锡, 吴梵. 舰艇强度[M]. 北京: 国防工业出版社, 2005.
[17] 罗斌, 陈强, 马骋, 等. 纵骨式全实肋板耐压液舱的纵骨计算方法探讨[J]. 舰船科学技术, 2004, 26(2): 19-20, 28.
LUO Bin, CHEN Qiang, MA Cheng, et al. Research on computing method of longitudinal rib strength of submarine ballast tank with longitudinal solid floor[J]. Ship Science and Technology, 2004, 26(2): 19-20, 28.
[18] 黄加强, 贺小型. 耐压液舱区域耐压船体强度的研究[J]. 海军工程学院学报, 1994, (4): 51-56.
HUANG Jia-qiang, HE Xiao-xing. Strength of pressure hull in the range of pressure tank with longitudinal and solid floor[J]. Journal of Naval University of Engineering, 1994, (4): 51-56.
[19] 朱邦俊, 邵冬云. 实肋板式耐压液舱结构液舱壳板稳定性计算方法的探讨[J]. 船舶力学, 1999, 3(4): 54-60.
ZHU Bang-jun, SHAO Dong-yun. Exploration on computing method of external shell stability of pressure tank structure with solid floor[J]. Journal of Ship Mechanics, 1999, 3(4): 54-60.
[20] 朱邦俊, 万正权, 徐秉汉, 等. 半圆环壳型肋骨加强的耐压圆柱壳结构稳定性研究[J]. 船舶力学, 2005, 9(1): 79-83.
ZHU Bang-jun, WAN Zheng-quan, XU Bing-han, et al. On the buckling of cylindrical shell ring-stiffened by half-tubes under hydrostatic pressure[J]. Journal of Ship Mechanics, 2005, 9(1): 79-83.
[21] 戴自昶. 潜艇实肋板带纵骨式耐压液舱壳板实际临界压力的计算[J]. 舰般科学技术, 1990(6): 19-24.
DAI Zi-chang. Calculation of actual critical pressure of submarine longitudinal pressure plate with the solid-floor[J]. Ship Science and Technology, 1990(6): 19-24.
[22] 戴自昶. 潜艇耐压船体特大肋骨的相当面积计算[J]. 舰船科学技术, 2000(5): 18-21.
DAI Zi-chang. Calculation of equivalent area of special ribs of the pressure hull of submarine[J]. Ship Science and Technology, 2000(5): 18-21.
[23] 张伟, 杜万亮, 马建军. 耐压液舱单层跨数对双层壳区域的应力影响研究[J]. 舰船科学技术, 2001, 23(4): 11-13.
ZHANG Wei, DU Wan-liang, MA Jian-jun. Study of the effect of single layer span number on the stress of double-layer shell in pressure tank[J]. Ship Science and Technology, 2001, 23(4): 11-13.
[24] 孙倩, 郑超瑜, 蔡振雄. 基于MATLAB的潜艇耐压液舱结构优化设计[J]. 造船技术, 2006(3): 9-12.
SUN Qian, ZHENG Chao-yu, CAI Zhen-xiong. Optimization design of pressure tank structure for submarine based on Matlab[J]. Marine Technology, 2006(3): 9-12.
[25] 黄镇熙, 王祖华. 潜艇耐压液舱设计[J]. 舰船科学技术, 2012, 34(4): 30-35.
HUANG Zhen-xi, WANG Zu-hua. Research on submarine pressure tank design[J]. Ship Science and Technology, 2012, 34(4): 30-35.
[26] 孙倩, 廖建彬, 蔡振雄. 潜艇耐压液舱区域有限元应力计算[J]. 船海工程, 2007, 36(2): 17-20.
SUN Qian, LIAO Jian-bin, CAI Zhen-xiong. FE stress analysis of the pressure tank structure of submarine[J]. Ship and Ocean Engineering, 2007, 36(2): 17-20.
[27] 孙倩, 蔡振雄, 赵国文. 全实肋板耐压液舱结构的应力有限元分析[J]. 集美大学学报(自然科学版), 2009, 14(3): 274-277.
SUN Qian, CAI Zhen-xiong, ZHAO Guo-wen. Finite element stress analysis of solid frame pressure tank structure[J]. Journal of Jimei University(Natural Science), 2009, 14(3): 274-277.
[28] 李巍, 谢祚水. 潜艇耐压液舱结构应力的三维有限元分析[J]. 华东船舶工业学院学报, 1999, 13(2): 1-4.
LI Wei, XIE Zuo-shui. 3-D Finite element stress analysis for pressure tank structure of submarine[J]. Journal of East China Shipbuilding Institute, 1999, 13(2): 1-4.
[29] 谢祚水, 梅利元, 李巍. 潜艇耐压液舱结构应力分析的有限元法[J]. 华东船舶工业学院学报, 1998, 13(2): 31-35.
XIE Zuo-shui, MEI Li-yuan, LI Wei. Finite element method for stress analysis of pressure tank structure of submarine[J]. Journal of East China Shipbuilding Institute, 1998, 13(2): 31-35.
[30] 梁学先. 潜艇耐压船体特殊问题的研究[D]. 哈尔滨: 哈尔滨工程序大学, 2005.
[31] PARK C M, YIM S J. Ultimate strength analysis of ring-stiffened cylinders under hydrostatic pressure [J]. Proceedings of the 12th Conf. on OMAE. 1993(1): 399-4-4P.
[32] 谢祚水, 孙倩. 耐压液舱结构的模型试验研究[J]. 华东船舶工业学院学报, 2000(5): 1-4.
XIE Zuo-shui, SUN Qian. Model experiment study on pressure tank structure[J]. Journal of East China Shipbuilding Institute, 2000(5): 1-4.
[33] 龚君来. 潜艇耐压液舱结构破坏原因及加强形式探讨[J]. 船海工程, 2007, 36(2), 32-34.
GONG Jun-lai. The destruction reason and reinforcement of submarine's pressure tank structure[J]. Ship & Ocean Engineering, 2007, 36(2), 32-34.
[34] 丁海旭, 沈永春. 用逼近目标规划模型进行潜艇耐压船体最佳设计[J]. 船舶力学, 2004(2): 79-85.
DING Hai-xu, SHEN Yong-chun. Approximate goal programming model for optimization design of submarine pressure hull structure[J]. Journal of Ship Mechanics, 2004(2): 79-85.
[35] 李学斌. 载人潜水器圆柱形耐压壳体的优化设计研究[J]. 海洋技术, 2007, 26(3): 5-8, 12.
LI Xue-bin. Optimization analysis of circular cylindrical shells for manned submersible vehicle [J]. Ocean technology, 2007, 26(3): 5-8, 12.
[36] 廖煜雷, 庞永杰, 张铁栋. 潜水器耐压壳体结构设计研究[C]//第十四届中国海洋(岸)工程学术讨论会论文集, 289-294.
[37] G GERARD. Minimum weight design of ring stiffened cylinders under external pressure[J]. Journal of Ship Research, 1961: 44-49.
[38] G REYNOLDS, O LOMACKY, M KRENZKE. Design and analysis of small submersible pressure bull[J]. Computers and Structures, 1973(3): 1125-1143.
[39] J J GORMAN, L L LOUIE. Submersible pressure hulls design parametric[J]. SNAME Trans, 1991: 146-149.
[40] 茅云生, 余小平, 马运义, 等. 潜艇内置式调整水舱的有限元计算[J]. 武汉理工大学学报(交通科学与工程版), 2005, 29(5): 652-654.
MAO Yun-sheng, YU Xiao-ping, MA Yun-yi, et al. Finite-element calculation for inner ballast water tank of submarine [J]. Journal of Wuhan University of Technology (Transpo rtat ion Science & Engineering), 2005, 29(5): 652-654.
[41] 吴梵, 刘令, 吴春芳. 含内置式耐压液舱舱段耐压船体结构应力分析[J]. 海军工程大学学报, 2015, 27(1): 55-58.
WU Fan, LIU Ling, WU Chun-fang. Stress analysis of pressure hull structure with inner pressure tank[J]. Journal of Naval of Engineering, 2015, 27(1): 55-58.
[42] 刘兴永, 朱枫, 计方. 单双壳体潜艇冲击响应对比研究[J]. 传感器与微系统, 2010, 29(9): 45-50.
LIU Xing-yong, ZHU Feng, JI Fang. Comparison research on impulsive response between a single-hull and a double-hull submarine [J]. Transducer and Microsystem Technologies, 2010, 29(9): 45-50.
[43] 白旭, 王晓天, 孙丽萍, 等. 单壳体潜艇球柱组合壳结构边缘效应分析[J]. 哈尔滨工程大学学报, 2013, 34(4): 409-414.
BAI Xu, WANG Xiao-tian, SUN Li-ping, et al. Edge effect analysis for sphere-cylinder combined shell of mono-shell submarine[J]. Journal of Harbin Engineering University, 2013, 34(4): 409-414.
[44] MACKAY J R, SMITH M J, KEULEN F, et al. Experimental investigation of the strength and stability of submarine pressure hulls with and without artificial corrosion damage [J]. Marine Structures, 2010(23): 339-359.
[45] KIM K, KIM U, PARK J. A study on effects of initial deflection on ultimate strength of ring-stiffened cylindrical structure under external hydrostatic pressure[C]//Proceedings of the Thirteenth International Offshore and Polar Engineering Conference. Honolulu, USA, 2003: 415-422.
[46] 周素莲, 聂武, 彭懿. 单壳体潜艇壳体结构损伤后的屈曲分析[J]. 哈尔滨工程大学学报, 2010, 31(9): 1131-1137.
ZHOU Su-lian, NIE Wu, PENG Yi. Analysis of the effects of the buckling of a damaged mono-shell submarine structure[J]. Journal of Harbin Engineering University, 2010, 31(9): 1131-1137.
[47] DONNELL L H, WAN C C. Effect of imperfections on buckling of thin cylinders and columns under axial compression [J]. Journal of Applied Mechanics, 1950(3): 72-83.
[48] SHEINMAN I, SIMITSES G J. Buckling analysis of geometrically imperfect stiffened cylinders under axial compression [J]. AIAA Journal, 1976, 15(3): 374-382.
[49] 陈虹, 冷文军. 美、俄核潜艇技术发展述评[J]. 舰船科学技术, 2008, 30(2): 38-44.
CHEN Hong, LENG Wen-jun. A review of the development of nuclear submarine technology in the US and Russia[J]. Ship Science and Technology, 2008, 30(2): 38-44.
[50] DCNS. Product Concepts[EB/OL]. http://www.dcn. fr/us/innovation/concept.html/2007-12-18.
[51] Statement of R. O Bourke before the Senate Armed Services Committee Subcommittee on Sea power Hearing on Navy Capabilities and Force Structure[Z]. 2005, 4, 12.
[52] JACKSON H A. Fundamentals of submarine concept design [J]. SNAME Transactions, 1992, 100: 419-448.
[53] U212/U214 Attack Submarines, Germany[EB/OL], http://www.naval-technology.com/projects/type212/2007-12-18.
