以在渤海服役20年的FPSO为研究对象，分别采用水动力分析软件MOSES和SESAM计算其静水载荷和波浪载荷，进而得到船体所受总纵外载荷。依据《海上浮式装置入级规范》中关于腐蚀速率的规定计算FPSO在计入腐蚀后的船体剖面模数，根据《钢质海船入级与建造规范》中的相关规定，对FPSO在运营不同年限后的总纵强度进行校核，同时提出了改造加强的建议。校核结果表明：该船目前的总纵强度满足规范要求。
In this paper, an FPSO that has operated nearly 20 years in Bohai bay was studied. The hydrostatic load and frequency wave load of the FPSO were respectively calculated by MOSES and SESAM, and then the longitudinal load of the hull would be obtained. The section modulus considering corrosion of the hull was calculated based on the regulation on corrosion rate in the "Rules for the Classification and Construction of Offshore Floating Units". Then the longitudinal strength of the FPSO after continuing to operate different years was checked based on the "Rules and Regulations for the Construction and Classification of Sea Going Steel Ships", and the suggestion for enhancing the structural strength was also be proposed. The code check results show that the longitudinal strength of this FPSO can man meet standard requirements.
2018,40(3): 83-88 收稿日期：2017-03-31
DOI：10.3404/j.issn.1672-7649.2018.03.015
分类号：U661
作者简介：李刚(1987-),男,硕士,工程师,主要从事海上浮式结构物设计工作
参考文献：
[1] 周守为, 曾恒一, 范模. 我国浮式生产储油装置的研制与开发[J]. 中国海上油气, 2006, 18(2):73-78.ZHOU Shou-wei, ZENG Heng-yi, FAN Mo. Floating production, storage and offloading system researched and developed in China[J]. China Offshore Oil and Gas, 2006, 18(2):73-78.
[2] 《海洋石油工程设计指南编委会》. 海洋石油工程FPSO与单点系泊系统设计[S]. 北京:石油工业出版社, 2007.Editorial Board of Guidelines for Offshore Oil Engineering Designing. Design of offshore oil engineering FPSO and single point mooring system[S]. Beijing:Petroleum Industry Press, 2007.
[3] 唐文勇, 张道坤, 刘坤, 等. 考虑腐蚀影响的FPSO风险接受准则研究[J]. 船舶力学, 2013, 17(5):502-512.TANG Wen-yong, ZHANG Dao-kun, LIU Kun, et al. Study on risk acceptance criterion of FPSO considering influence of corrosion[J]. Journal of Ship Mechanics, 2013, 17(5):502-512.
[4] JOEM K P. Ship hull ultimate strength reliability considering corrosion[J]. Journal of Ship Research, 1998, 42(2):154-165.
[5] 马巍巍, 范模, 李达, 等. 提高老旧船形浮体总纵强度探讨[J]. 中国海上油气, 2011, 3(1):66-70.MA Wei-wei, FAN Mo, LI Da, et al. Research on raising longitudinal strength of old ship shape naval architecture[J]. China Offshore Oil and Gas, 2011, 3(1):66-70.
[6] 邱世欣, 赵胜涛, 胡楠, 等. FPSO延期服役评估方法[J].中国修船, 2013, 26(1):52-54.QIU Shi-xin, ZHAO Sheng-tao, HU Nan, et al. Extended service evaluation method for FPSO[J]. China Shiprepair, 2013, 26(1):52-54.
[7] 中国船级社. 油船结构直接计算分析指南[S]. 北京:人民交通出版社, 2003.China Classification Society. Guide for directing calculation of oil tanker structure[S]. Beijing:China Communications Press, 2003.
[8] 戴仰山, 沈进威, 宋竞正. 船舶波浪载荷[M]. 北京:国防工业出版社, 2007.
[9] 刘水庚译. BEREARD MOLIN著. 海洋工程水动力学[M]. 北京:国防工业出版社, 2012.
[10] 中国船级社. 海上浮式装置入级与建造规范[S]. 北京:人民交通出版社, 2013.
[11] 中国船级社. 钢质海船入级与建造规范[S]. 北京:人民交通出版社, 2006.
