本文简要阐述了舰船齿轮传动装置减振降噪的军事意义和作用，在明确了齿轮传动装置振动噪声产生机理的基础上，从传动装置总体、传动齿轮和箱体支撑三方面分别论述了目前常用的减振降噪措施，并通过实例证明可达到的振动控制效果；进一步探讨了我国在舰船齿轮传动装置减振降噪技术积累和试验研究方面存在的不足，并从建立技术体系的角度提出了传动装置振动控制技术进一步发展的建议，有助于我国舰船齿轮传动装置减振降噪技术的全面发展。
In this paper, the military significance and function of vibration and noise reduction of ship gear transmission are briefly described. On the basis of clarifying the production mechanism for vibration and noise of gear transmission, the current measures of the vibration and noise reduction have been discussed from three aspects, such as the whole transmission device, transmission gears and boxes. Meanwhile, many real examples have been performed to prove the effect which we can achieve about vibration control; then the shortcomings which exist in our country about technology accumulation and experimental study of the vibration and noise reduction of ship gear transmission have been explored further. So, some suggestion about these improvements has been propounded based on horizon of establishing technical systems, which is helpful to make more progress for the more comprehensive development of vibration and noise reduction technology of ship gear transmission of our country in the future.
2018,40(12): 114-118 收稿日期：2018-09-19
DOI：10.3404/j.issn.1672-7649.2018.12.023
分类号：TH132.41
作者简介：葛仁超(1981-),工程师,主要研究方向为舰船机电动力
参考文献：
[1] 唐定国, 陈国民. 齿轮传动技术的现状和展望[J]. 机械工程学报, 1993, 20(5):35-42 TANG Dingguo, CHEN Guomin. Actualities and prospect about gear transmission technology[J]. Journal of Mechanical Engineering, 1993, 20(5):35-42
[2] 王学飞. 噪声与降噪技术[M]. 北京:机械工业出版社, 1986.
[3] 程万康. 大功率舰船后传动装置发展趋势[J]. 现代制造工程, 2005(2):140-141 CHENG Wankang. Trends in development about the rear transmission device for high power ships[J]. Journal of Modern Manufacturing Engineering, 2005(2):140-141
[4] 张继红, 高佑芳, 韩星. 降低齿轮噪声的创新设计原理[J]. 机床与液压, 2004(12):45-50 ZHANG Jihong, GAO Youfang, HAN Xing. Innovative design principles for decreasing noise of gears[J]. Machine Tools and Hydraulic Pressure, 2004(12):45-50
[5] 魏任之,等. 齿轮的修形与降噪[C]//第二届全国齿轮动力学会议论文, 1987. WEI Ren-zhi, et al. Modification and noise reduction of gears[C]//The Second National Conference on Gear Dynamics, 1987.
[6] 方宗德. 正齿轮传动的动载荷影响因素分析[J]. 西安交通大学学报, 1988 FANG Zongde. Analysis of the influence from dynamic load of spur gear transmission[J]. Journal of Xi'an Jiao Tong University, 1988
[7] JONGSUK L, SEUNGSUK Oh, JEASUNG Chung, et al. Real-time combustion phase detection using central normalized difference pressure in CRDI diesel engines[J]. Journal of Engineering for Gas Turbines and Power, 2012, 134(8):82801-82801
[8] CHONG M. Experimental and numerical investigation of combustor-turbine interaction using an isothermal, nonreacting tracer[J]. Journal of Engineering for Gas Turbines and Power, 2012, 134(8):81501-81501
