船用共轨增压柴油机硬件在环仿真模型，要兼顾模型准确度和实时性。平均值模型实时性好，但准确度不高，准维模型准确度高，但不满足实时性要求。本文针对16缸船用共轨增压柴油机，建立基于缸内过程热力学计算的零维实时仿真模型。通过实时仿真试验验证了模型功能、精度和实时性，满足硬件在环仿真要求。
The real time simulation model of common rail and turbocharged marine diesel engine is used on hardware in the loop. The accuracy and real-time of the model should be taken into account. The average value model has good real-time performance, but the accuracy is not high. The accuracy of the quasi-dimensional model is high, but cann't be met the requirement of real time. In the paper, a zero dimension real time simulation model based on the thermodynamic calculation of the 16 cylinders common rail and turbocharged diesel engine is established. Through real time simulation testing, the function, the precision and real-time performance of the model meet the requirement of the hardware in the loop simulation.
2019,41(2): 99-105 收稿日期：2018-04-01
DOI：10.3404/j.issn.1672-7649.2019.02.020
分类号：U664.1
作者简介：李金华(1982-),女,硕士研究生,主要研究方向为软件测试
参考文献：
[1] 杜剑维. 基于dSPACE的相继增压柴油机硬件在环仿真[D]. 哈尔滨:哈尔滨工程大学, 2007.
[2] 蒋方毅. 基于模型的柴油机硬件在环仿真与控制研究[D]. 武汉:华中科技大学, 2009.
[3] 杨闻睿, 敖国强, 等. 高压共轨柴油机ECU硬件在环仿真系统软件设计[J]. 内燃机工程, 2009, 30(5):41-45
[4] 凌健, 刘希, 谢晖. 高压共轨柴油机ECU硬件在环实时仿真及测试平台的开发[C]//. 中国内燃机学会燃烧节能净化分会2009年学术年会. CSICE2009-091.
[5] 齐鲲鹏, 隆武强, 冯立岩. 硬件在环仿真系统中柴油机工作过程建模研究[J]. 内燃机工程, 2007, 28(6):49-52
[6] DEEPA R, RYAN M S S. A case study in hardware-in-the-loop testing:development of an ecu for a hybrid electric vehicle[J]. SAE Technical Paper Series, 2004-01-0303(2004).
[7] 岳继光, 董延超. 汽车发动机模型硬件在环仿真研究[J]. 系统仿真技术, 2008(4):85-89
[8] 王文成. 高压共轨柴油机轨压控制策略的研究[D]. 北京:中国舰船研究院. 2017
