对某工业型燃气轮机常见典型故障进行分析，针对各典型故障可能出现的故障诱因，总结出故障排查方向；针对常发生的典型故障，提出燃气轮机运行注意事项，对燃气轮机稳定运行具有重要意义。
This paper analyses the common typical faults of an industrial gas turbine, sums up the direction of tro- ubleshooting according to the possible causes of the typical faults, and puts forward the matters needing attention- in the operation of the gas turbine, which is of great significance to the stable operation of the gas turbine.
2019,41(11): 129-133 收稿日期：2019-03-25
DOI：10.3404/j.issn.1672-7649.2019.11.026
分类号：TK478
作者简介：魏昌淼(1989-),男,硕士,从事燃气轮机调试及试验工作
参考文献：
[1] 清华大学电力工程系燃气轮机教研组. 燃气轮机(上册)[M]. 北京:水利电力出版社, 1978:380-381.
[2] 王钟铭. 舰船燃气轮机装置[M]. 北京:国防工业出版社, 1981:206-211.
[3] 滕国生, 万恒奕. 舰用燃气轮机起动失效分析[J]. 海军工程大学学报, 1999, 88(3):120-122 TENG Guo-sheng, WAN Heng-yi. Analysis of start failure of marine gas turbine[J]. Journal of Naval Academy of Engineering, 1999, 88(3):120-122
[4] 谭燕. CFM56-7B发动机的热启动及启动悬挂[J]. 中国民航飞行学院学报, 2011:24-29 TAN Yan. Hot start and hung start of CFM56-7B engine[J]. Journal of Civil Aviation Flight University of China, 2011:24-29
[5] 付忠广, 张辉. 电厂燃气轮机概论[M]. 北京:机械工业出版社, 2014:227-228.
[6] 曲文浩. 燃气轮机转速传感器断路故障分析[J]. 机械研究与应用, 2015, 2(28):150-151. QU Wen-hao. Failure analysis on speed sensor circuit of the gas turbine[J]. Mechanical Research & Application, 2015, 2(28):150-151.
[7] 贺星, 刘永葆, 赵雄飞. 基于进化神经网络的压气机结垢性能退化评估[J]. 航空发动机, 2012, 38(2):41-45 HE Xing, LIU Yong-bao, ZHAO Xiong-fei. Performance deterioration evaluation of compressor fouling based on evolving neural network[J]. Aero Engine, 2012, 38(2):41-45
[8] 房友龙, 刘东风, 刘永葆, 等. 燃气轮机结垢性能退化特征提取和剩余寿命预测[J]. 海军工程大学学报, 2018, 30(2):100-104 FANG You-long, LIU Dong-feng, LIU Yong-bao, et al. Ondegradation feature extraction and remaining use fullife prognostic of gas tubine engine under fouling[J]. Journal of Naval University of Engineering, 2018, 30(2):100-104
[9] 贺星, 刘永葆, 余又红. 压气机结垢气动热力特性数值分析[J]. 海军工程大学学报, 2014, 26(4):110-112 HE Xing, LIU Yong-bao, YU You-hong. Numerical analysis of aero thermodynamic performance of compressor with fouling[J]. Journal of Naval University of Engineering, 2014, 26(4):110-112
