船舶设计和建造领域应用三维技术手段逐渐成为趋势。为了研究三维设计手段在船舶总体布置设计过程中的应用情况，以某船的二维平面设计成果为基础，对总体布置设计某些重点环节进行三维化适应性调整，提出三维总体布置设计的基本任务分解方案，并运用CATIA软件进行其三维总体布置设计。通过研究及设计初步成果显示，船舶总体布置设计应用三维技术手段相较于传统二维平面设计更加直观和高效，巨大数据量的管理应基于按一定规则对任务进行组织编排。本文研究内容可为相关领域的三维设计研究和应用提供参考。
It is a tendency that tridimensional technique is used widely in ship design and construction field. In order to research a tridimensional design measurement on ship general arrangement, CATIA software is applied based on bi-dimensional design achievements of a certain ship. Meanwhile, some tridimensional adaptiveness regulations of key points for general arrangement are carried out, and a scheme of fundamental mission decomposition for tridimensional general arrangement design is proposed. Displaying by means of the research and the preliminary result of the tridimensional design, tridimensional measurement visualizes better and acts better efficiency than traditional bi-dimensional design, and it’s possible to manage the tremendous datum through making a permutation of the mission according to specified regulation. The research may help relative studies and applications on tridimensional design for reference.
2020,42(7): 13-17 收稿日期：2019-11-07
DOI：10.3404/j.issn.1672-7649.2020.07.003
分类号：U662.2
作者简介：陈鹏华(1989-),男,工程师,研究方向为舰船总体设计
参考文献：
[1] HEKKENBERG R. The Virtual Fleet-use of extended conceptual design data for trend analysis of inland ship characteristics[C]. 9th International Conference on Computer and IT Applications in the Maritime Industries/ Volker Bertram, 2010: 124-131.
[2] KURKI T. Utilization of integrated design and mesh generation in ship design process[C]. 9th International Conference on Computer and IT Applications in the Maritime Industries, 2010: 311-318.
[3] GÓMEZ A., KORBETIS G., REGUEIRA F. Cost reduction in basic ship design supported by a single structural model-a practical approach[C]. 2016: 589.
[4] GÓNGORA R DE, GÓMEZ P. 3D Model-Based: initial and basic ship design[C]. 37th WEGEMT Summer School/ ETSI Navales: 71-118, 120-125.
[5] 邵开文, 张骏. 总体者, 集大成也[J]. 中国舰船研究, 2008, 3(1): 1-4, 12
[6] 徐青. 舰船总体设计流程分析[J]. 中国舰船研究, 2012, 7(5c): 1-7
[7] MAYER L S. Simulation of aircraft landing gear dynamics using CATIA, CATDADS, DADS and NASTRAN at Cessna aircraft[C]. SAE Technical Paper Series, 2000: 1-6.
[8] 蔡锦阳, 孙刚, 徐康乐. CATIA曲面造型技术在大型民用客机增升装置设计中的应用[J]. 复旦学报(自然科学版), 2011, 50(6): 773-779
[9] 姚慧岚, 船舶3D总体设计技术研究[D]. 大连: 大连海事大学, 2013.
[10] 王宁, 陈明, 管官, 等. 结合人机工程学的船舶总体设计虚拟验证[J]. 船舶工程, 2013(35): 117-122
[11] 卢永进, 吴波, 林锐, 等. CATIA V6三维设计轮机建库关键技术[J]. 机械, 2016, 43(8): 23-26
[12] 卢永进, 吴波, 李涛涛. 基于CATIA V6的船舶风管数据分析[J]. 中国舰船研究, 2017, 12(2): 57-62
[13] 卢永进, 林锐. CATIA V6船舶三维设计实例[M]. 哈尔滨: 哈尔滨工程大学出版社, 2016.
[14] 秦沛阳. 基于CATIA的舰载显控台人机工程研究[J]. 机械设计, 2017, 34(10): 105-109
[15] 李苏红, 孟祥宝, 李军, 等. 通过数据交换在CATIA V5中创建工程图[J]. 江苏大学学报(自然科学版), 2006, 27(5A): 31-34
[16] 汪亚超, 李小帅, 黄艳芳, 等. 基于CATIA的水工结构制图标准控制方法研究[J]. 人民长江, 2014, 45(1): 77-81
