对盲孔法测残余应力中的等轴三角应变花应变释放系数进行有限元标定和塑性修正，得到了塑性修正后的应变释放系数；采用盲孔法对高强度钢水下承压结构典型部位的焊接残余应力进行测量，根据测试得到各测点的释放应变值，结合修正后的应变释放系数计算得到了水下承压结构典型测点的残余应力值。结果表明，水下承压结构焊缝附近纵向残余应力可达0.5倍屈服极限，周向残余应力可达0.4倍屈服极限。
The calibration and plastic correction of the strain release coefficients of triaxial equiangular strain gauge in blind-hole residual stress measurement method were presented by using finite element method. the residual stress of the high strength steel underwater structure were measured by the blind-hole method using the plastic corrected coefficients. It is shown that the longitudinal residual stress reaches approximately 0.5σs near the weld toe while the circumferential residual stress reaches approximately 0.4σs.
2021,43(4): 23-27 收稿日期：2020-04-08
DOI：10.3404/j.issn.1672-7649.2021.04.005
分类号：U661.4;O348
基金项目：装备预研船舶重工联合基金资助项目(k6505)
作者简介：黄如旭(1987-),男,高级工程师,研究方向为船舶与海洋工程结构疲劳与断裂理论、实验及数值模拟
参考文献：
[1] 李良碧, 万正权, 王自力, 等. 高强度钢耐压锥柱壳体焊接残余应力数值分析[J]. 中国造船, 2010, 51(3): 128-137
LI LB, WAN ZQ, WANG ZL, et al. Numerical analysis of welding residual stress on high strength steel cone-cylinder pressure hull[J]. Shipbuilding of China, 2010, 51(3): 128-137
[2] 张震. 焊接残余应力对耐压结构极限承载能力影响研究[D]. 无锡：中国船舶科学研究中心, 2017.
ZHANG Z. Influence of welding residual stress on ultimate strength of pressure structure[D]. Wuxi: China Ship Scientific Research Center, 2017.
[3] 卞如冈, 崔维成, 万正权, 等. 焊接残余应力对疲劳寿命影响的定量研究[J]. 船舶力学, 2011, 15(7): 776-783
BIAN RG, CUI WC, WAN ZQ, et al. A quantitative stud on the effect of welding residual stress on fatigue life[J]. Ship Mechanics, 2011, 15(7): 776-783
[4] 吴国庆, 王永军, 张震, 等. 船用高强度钢焊接残余应力测量技术研究[J]. 船舶工程, 2016, 38(3): 59-64
WU GQ, WANG YJ, ZHANG Z, et al. Research on test method for welding residual stress of marine high-tensile steel[J]. Ship Engineering, 2016, 38(3): 59-64
[5] 苏礼季, 周广涛, 刘洪生. 盲孔法测LY12铝合金焊接残余应力时应变释放系数的标定及塑性修正[J]. 机械工程材料, 2016, 40(4): 48-53
SU LJ, ZHOU GT, LIU HS. Calibration and plastic correction on strain release coefficients in welding residual stress measurement of LY12 aluminum alloy by blind-hole method[J]. Materials and Testing, 2016, 40(4): 48-53
[6] 马小明, 欧清扬. 盲孔法测曲面残余应力时释放系数的数值模拟[J]. 华南理工大学学报(自然科学版), 2019, 47(12): 25-31
MA XM, OU QY. Numerical simulation for hole-drilling strain gage method applied on curved surface[J]. Journal of South China University of Technology, 2019, 47(12): 25-31
[7] 张涛, 王志宇, 李晓磊. T形接头钢板焊接残余应力试验研究[J]. 建筑结构学报, 2018, 39(S2): 128-134
ZHANG T, WANG ZY, LI XL. Experimental study on welding residual stress of T-joint steel plate[J]. Journal of Building Structures,, 2018, 39(S2): 128-134
[8] 甘世明, 韩永全, 陈芙蓉, 等. 基于弹性模量变化的7A52铝合金VPPA-MIG复合焊接残余应力测试[J]. 焊接学报, 2019, 40(5): 13-17+23+161
GAN SM, HAN YQ, CHEN FR, et al. 7A52 aluminum alloy VPPA-MIG hybrid welding residual stress testing based on elastic modulus variation[J]. Transactions of the China Welding Institution, 2019, 40(5): 13-17+23+161
[9] 侯海量, 朱锡, 刘润泉. 盲孔法测量焊接残余应力应变释放系数的有限元分析[J]. 机械强度, 2003, 25(6): 632-636
HOU Hai-liang, ZHU Xi, LIU Run-quan. FEM analysis on the strain release factors for measuring welding residual stresses using blind-hole method[J]. Journal of Mechanical Strength, 2003, 25(6): 632-636
[10] 张如一, 沈观林, 李朝弟. 应变电测与传感器[M]. 北京: 清华大学出版社, 1999.
