针对全回转推进器传动锥齿轮齿数的设计，始终缺乏一套方法从众多齿数中，选定较佳的齿轮齿数。本文通过汇总锥齿轮齿数要求的相关资料，剖析各类要求的特点，转化为程序语言，利用Excel表格、VBA编程，找到一套关于全回转推进器传动锥齿轮齿数设计的通用方法。该方法归纳了锥齿轮齿数要求的特点，适用于一级或二级锥齿轮传动，能够快速地为全回转推进器选定较佳的传动锥齿轮齿数，提高设计效率。
For the design of azimuth thruster transmission bevel gear teeth number, always there is no method, selecting the better gear teeth number from lots of teeth numbers. In this paper, by collecting the relevant data of requirements for bevel gear teeth number, and analyzing the characteristics of each requirement, and converting to programming language, and using EXCEL and VBA, one general method of azimuth thruster transmission bevel gear teeth number design has been found. In the method, the characteristics of requirements for bevel gear teeth number is summed up, and the method can be applied to one step or two steps of bevel gear transmission, which can be used to select the better transmission bevel gear teeth number for azimuth thruster quickly, increasing design efficiency.
2021,43(5): 116-119 收稿日期：2020-07-09
DOI：10.3404/j.issn.1672-7649.2021.05.024
分类号：U664.3
基金项目：工信部高技术船舶科研项目
作者简介：张方华(1983-)，男，助理工程师，主要从事船用推进器的设计、研发等工作
参考文献：
[1] 常晓雷. 1000HP定螺距全回转推进器设计与开发研究[D]. 南京: 东南大学, 2015.
CHANG Xiao-lei. 1000HP fixed pitch azimuth thruster design and development research[D]. Nanjing: Southeast University, 2015.
[2] 乔鸣忠, 于飞, 张晓锋. 船舶电力推进技术[M]. 北京: 机械工业出版社, 2013.
[3] 齐冬. 港口全回转拖轮应用及其舵桨装置研究[D]. 大连: 大连海事大学, 2012.
QI Dong. Application of port tugboat and azimuth thruster research[D]. Dalian: Dalian Maritime University, 2012.
[4] 成大先. 机械设计手册[M]. 北京: 化学工业出版社, 2016, 3(15): 272-273.
[5] 齿轮手册编委会. 齿轮手册[M]. 北京: 机械工业出版社, 2000, 5: 20−21.
[6] 沈武铮. 对转桨全回转Z型推进装置及其在汽车渡轮上的应用[J]. 舰船科学技术, 1997(S): 6–9
SHEN Wu-zheng. Contra-rotating propeller Z-type azimuth thruster and its application on car ferries[J]. Ship Science and Technology, 1997(S): 6–9
[7] 齿轮手册编委会. 齿轮手册[M]. 北京: 机械工业出版社, 2000, 5: 12−13.
[8] International Organization for Standardization. ISO 23509: 2016(E) Bevel and hypoid gear geometry[S]. Switzerland: ISO, 2016.
[9] 齿轮手册编委会. 齿轮手册[M]. 北京: 机械工业出版社, 2000, 5: 14−15. .
[10] 成大先. 机械设计手册[M]. 北京: 化学工业出版社, 2016, 3(15): 284−285.
[11] 齿轮手册编委会. 齿轮手册[M]. 北京: 机械工业出版社, 2000, 5: 17−18.
