为了提高舰载装备的研制效率，在岸基环境下全面、真实地模拟舰船在航行状态下的各种姿态特性，自行研制2自由度舰船海况模拟摇摆台。介绍整机的结构方案，对各主要模块进行说明。针对控制要求，给出系统的控制方案。分析关键部件的选取，软件的设计，最后进行设计验证。通过软件仿真，得出力学参数，完成系统的总体方案设计。
In order to improve the efficiency of the shipboard equipment development, simulate the ship features in shore-based environment comprehensively and truly, two degrees of freedom ship sea state simulation swaying platform is developed. The structure scheme of equipment is introduced and each module is explained. The control scheme of system is given for control requirements. The selection of key components is analyzed, the software is designed. Finally, the design is proved to be effective through the software simulation experiment.
2021,43(8): 158-162 收稿日期：2020-08-17
DOI：10.3404/j.issn.1672-7649.2021.08.031
分类号：TP395
作者简介：程阳(1990-),男,工程师,主要从事装备试验总体技术研究
参考文献：
[1] SUN Y, NEWMAN M, ZYGIELBAUM A, et al. Active vibration vamping of a cable-driven parallel manipulator using a multirotor system[C]. Cable-Driven Parallel Robots. 2019.
[2] 赵江波, 王军政, 汪首坤, 等. 四自由度摇摆台的研制[J]. 液压与气动, 2003(10): 5–7
[3] 张天骄, 高洪涛. 船舶摇摆条件下吸收式制冷机组性能实验研究[J]. 工程热物理学报, 2019, 40(2): 10–15
[4] 瞿元新, 潘高峰, 毛南平. 船载雷达伺服系统船摇隔离度静态测试方法[J]. 现代雷达, 2018, 40(11): 68–71
[5] 王国清. 三自由度重型摇摆台控制系统设计[D]. 哈尔滨：哈尔滨工业大学, 2006.
[6] 欧阳昕, 刘山尖, 钱兆俊. 三自由度摇摆台控制系统设计[J]. 船舶工程, 2010, 32(1): 48–51
[7] KAI L, YINING C, YANG W U, et al. Rotation control of a 3-DOF parallel mechanism driven by pneumatic muscle actuators[J]. Transactions of Nanjing University of Aeronautics and Astronautics, 2019(2)
[8] LIU K, XU J, GE Z, et al. Robust control of 3-DOF parallel robot driven by PMAs based on nominal stiffness model[J]. Advanced Robotics, 2017: 1–13
[9] SINGH M D, LIEM K. Force control of a fluidic muscle driven parallel platform[J]. Pamm, 2010, 7(1): 4130041–4130042
[10] WANG Y, CAO G, HORSSEN W T V. Dynamic simulation of a multi-cable driven parallel suspension platform with slack cables[J]. Mechanism and Machine Theory, 2018, 126: 329–343
