通用型FPSO的压载水系统作为调整整船航行状态的重要系统，通过对其管路应力、泵口、法兰等的校核优化，系统的安全性能已经得到极大提高，但是要想使其安全性能最大化，还需要对该系统进行适当的动力分析。当整个系统运行时，管道系统会受到其他管道设备等的影响产生振动，当管道固有频率与其激振频率接近时会发生共振，造成管段的损坏。运用Caesar II软件，主要对通用型FPSO压载水管道进行模态分析，探究在动载荷作用下管道的振动情况，并对不合理部位进行优化，使得压载水系统安全性能再次得到提升。
As an important system to adjust the whole ship's navigation state, the ballast water system of general-purpose FPSO has greatly improved its safety performance by checking and optimizing its pipeline stress, pump port, flange, etc,.However, in order to maximize the safety performance of the system, proper dynamic analysis is needed. We know that when the whole system is running, the pipeline system will be affected by other pipeline equipment to produce vibration. When the natural frequency of the pipeline is close to its exciting frequency, resonance will occur, causing damage to the pipeline section. By using CAESAR II software, the mode analysis of the general FPSO ballast water pipeline is mainly carried out to explore the vibration of the pipeline under the dynamic load, and the unreasonable parts are optimized, so that the safety performance of the ballast water system is improved again.
2021,43(9): 95-97 收稿日期：2020-05-15
DOI：10.3404/j.issn.1672-7649.2021.09.018
分类号：U664.84
作者简介：陆凯(1994-)，男，硕士研究生，研究方向为船舶管道的动态特性分析和减振控制方向
参考文献：
[1] 刘豫. 管道应力分析概述[J]. 化工管理, 2017(15): 198–199
[2] 陈雨菲, 李珍. CAESAR Ⅱ在FPSO管路应力计算中的应用[J]. 广东造船, 2017, 36(5): 57–59
[3] 徐俊. 基于CAESAR Ⅱ的核应急发电机组辅机系统管道应力分析[D]. 镇江：江苏科技大学, 2016: 46−48.
[4] 闫越, 窦培林. FPSO消防水系统玻璃钢管路应力分析[J]. 中国水运(下半月), 2016, 16(12): 252–254
[5] 王超. 深水半潜平台关键管线数值应力分析[D]. 镇江：江苏科技大学, 2012: 38−40.
[6] 张建. 深海FPSO关键管路应力分析[D]. 镇江：江苏科技大学, 2015: 45−47.
[7] 杨羽华, 刘辉, 黄颖. CAESARⅡ软件在管道设计中的应用[J]. 化工设计, 2012, 22(3): 80–85
[8] 刘立伟. 从应力分析的角度简述FPSO上管路布置注意事项[J]. 现代工业经济和信息化, 2015, 5(16): 60–62
