简要介绍CSR规范关于散货船槽型舱壁描述性强度计算的基本要求，根据具体要求分析得出了关于散货船槽型舱壁描述性强度的正确计算流程，详细阐述了基于弯曲强度要求的多目标优化计算流程和方法，并给出了计算实例进行说明。对槽形优化计算时的加厚策略进行研究，研究表明只增加槽条下端板厚的策略最优。
A brief description of the basic requirements of CSR about prescriptive strength assessment of corrugated bulkhead of bulk carrier is given. Analyzing according to the requirements, correct process of prescriptive strength assessment of corrugated bulkhead of bulk carrier is created. The optimization calculation process and method based on bending strength requirement are described in detail, and some illustrative calculation examples are given. Several thickening strategies applied in optimization calculation have been researched, and it proved that only thickening the lower end of corrugation is the best.
2022,44(4): 20-24 收稿日期：2021-06-15
DOI：10.3404/j.issn.1672-7649.2022.04.005
分类号：U674.13+4；U663.4
作者简介：李平书(1981-)，男，硕士，高级工程师，主要从事船舶结构设计和研究工作
参考文献：
[1] IACS, Common structure rules for bulk carriers and oil tankers[S]. 2020.
[2] 甘水来, 李国强, 李勇. 基于共同规范的散货船槽型横舱壁设计研究[J]. 船舶与海洋工程, 2014, 97(1): 32–38
GAN Shui-lai, LI Guo-qiang, LI Yong. Study on the design of bulk carrier corrugation bulkhead based on CSR Rules[J]. Naval Architecture and Ocean Engineering, 2014, 97(1): 32–38
[3] 李文涛. 38000DWT 小灵便散货船槽型横舱壁的设计研究[J]. 船舶与海洋工程, 2016, 32(2): 10–15
[4] 陈浩. 货舱进水状态下水密槽形舱壁强度计算[J]. 上海造船, 2004(1): 52–55
CHEN Hao. Evaluation of scantlings of corrugated transverse watertight bulkheads in bulk carriers considering hold flooding[J]. Shanghai Shipbuilding, 2004(1): 52–55
[5] 王佳颖, 牛俊, 杨仁记. 散货船结构优化设计[J]. 船海工程, 2014, 43(6): 60–64
[6] 王从晶. 76000 t CSR散货船结构优化技术浅析[J]. 造船技术, 2015(1): 13–19
WANG Cong-jing. Research on structural optimization of 76000 t CSR bulk carrier[J]. Marine Technology, 2015(1): 13–19
[7] 严卫祥, 夏利娟, 王从晶. 基于CSR的散货船最首尾货舱结构强度分析[J]. 舰船科学技术, 2014, 36(6): 48–53
YAN Wei-xiang, XIA Li-juan,WANG Cong-jing. Finite element analysis of fore and aft hold of bulk carrier based on CSR[J]. Ship Science and Technology, 2014, 36(6): 48–53
[8] 陈哲超, 李文华, 罗仁杰, 等. 散货船重压载舱横舱壁底凳与内底连接处结构加强方案研究[J]. 船舶, 2018, 29(5): 23–32
CHEN Zhe-chao, LI Wen-hua, LUO Ren-jie, et al. On structure reinforcement schemes of connection between transverse bulkhead lower stool and inner bottom on heavy ballast tank of bulk carrier[J]. Ship & Boat, 2018, 29(5): 23–32
