客滚船车辆甲板强横梁和纵桁的强度、刚度一般由直接计算方法分析校核，梁系模型和有限元模型是最常使用的2种直接计算模型。利用以上2种模型对车辆甲板典型门式钢架结构进行建模，对比分析其在均布载荷作用下的静力响应，结果显示钢架端部无肘板交叉连接处剪应力存在较大差异，分析差异原因并回归了该位置梁系模型和有限元模型剪应力的换算关系，使梁系模型计算结果更接近有限元分析结果，提高初步设计阶段车辆甲板主要支撑构件的设计精度。
Design and evaluation of a Ro/Ro passenger ship’s vehicle deck primary structural members are generally carried by direct calculation method. The beam model and finite element model are the two most commonly accepted by classification societies. By comparing the results of beam model and the finite element model for a typical portal frame of Ro/Ro passenger ship, shear stress in beam-to-column connection is corrected to make the results of beam model closer to that of the finite element model which could make the structure more reliable at preliminary design stage.
2022,44(10): 16-20 收稿日期：2021-10-10
DOI：10.3404/j.issn.1672-7649.2022.10.004
分类号：U661.42
作者简介：高处(1984-)，男，硕士，工程师，研究方向为船舶结构设计
参考文献：
[1] 何皛磊. 中国高端客滚船的市场前景[J] 船舶, 2019(3): 32-36.
HE Xiaolei. Market prospect of high-end RoPax in China[J]. Ship and Boat, 2019(3): 32-36.
[2] 顾耀军, 王麟. 16 000总吨客滚船设计与建造技术[J]. 上海造船, 2007(3): 21–24
GU Yaojun, WANG Lin. Design and construction technology of a 16000GT RoPax[J]. Shanghai Shipbuilding, 2007(3): 21–24
[3] 孙家鹏, 张敏健. 中韩航线客滚船设计特点及关键技术[J]. 船舶与海洋工程, 2018(34): 31–35
SUN Jiapeng, ZHANG Minjian. Design features and key technologies of RoPax ship for sino-south Korea route[J]. Naval Architecture and Ocean Engineering, 2018(34): 31–35
[4] 中国船级社. 钢制海船入级规范[S]. CCS, 2018.
China Classification Society. Rules and regulations for the classification of sea-going steel ships[S]. CCS, 2018.
[5] 严金勇. 1400客/2 000 m客滚船车辆甲板横向强度有限元计算与分析[J]. 船舶设计通讯. 2013(135): 43-50.
YAN Jinyong. The calculation and analysis for the transverse strength of vehicle deck of 1400 passenger and 2000 meter Ro-Ro passenger vessel with FEM[J]. Journal of Ship Design, 2013(135): 43-50.
[6] FIELDING D J. HUANG J S. Shear in steel beam-to-column connections[J] Welding Research Supplement, 1971: 313-325.
[7] 刘相春, 李陈峰, 任慧龙, 等. 大跨度板架屈曲分析的非线性有限元法[J]. 舰船科学技术, 2013, 35(1): 46–50
LIU Xiangchun, LI Chenfeng, REN Huilong, et al. The NFEM for buckling analysis of large-span grillage[J]. Ship Science and Technology, 2013, 35(1): 46–50
