研究半穿甲弹对舰船加筋板结构穿甲过程对于舰船结构设计以及使用半穿甲弹对舰船进行打击时的毁伤评估分析等都具有重要参考价值。采用数值模拟方法研究半穿甲弹对舰船加筋板结构穿甲过程的结构响应、毁伤机理以及弹丸穿甲剩余速度，并将数值模拟和理论计算结果做对比，验证数值方法的可靠性。结果表明，当弹丸分别对加筋板有筋部位和无筋部位侵彻时，加筋板的破口形态、能量吸收以及弹丸速度变化等情况都有明显不同，可见加强筋对于弹丸穿甲影响的大小主要取决于弹丸着靶的位置。
The research on armor piercing process of ship stiffened plate by semi-armor-piercing projectile is of significance for ship structure design and damage assessment. The numerical simulation method is adopted to research on structural response, damage mechanism and residual velocity of the projectile when the ship stiffened plate is penetrated by semi-armor-piercing projectile. Verify the reliability of numerical methods by comparing the results of numerical simulation and the theoretical. The results show that when the projectile penetrates into the reinforced and non-reinforced parts of the stiffened plate, the size of the break in the stiffened plate, the energy absorption, and the change of the projectile velocity are all significantly different. It can be seen that the impact of the ribs on the penetration of the projectile depends on the position of the penetration.
2022,44(13): 1-6 收稿日期：2021-11-03
DOI：10.3404/j.issn.1672-7649.2022.13.001
分类号：U663.2
基金项目：大连舰艇学院科研发展基金资助课题（编号DKYKYKT2021-019）
作者简介：谢保军(1986-),男,硕士,讲师,研究方向为舰炮弹药毁伤效能评估
参考文献：
[1] 陈长海, 朱锡, 侯海量. 加筋板架抗动能穿甲的等效防护厚度研究[J]. 海军工程大学学报, 2010, 22(1): 31–38
CHEN C H, ZHU X, HOU H L. Equivalent protection thickness of stiffened plate against kinetic piercing[J]. Journal of Naval University of Engineering, 2010, 22(1): 31–38
[2] 张宁. 半穿甲弹对舰船钢的穿甲弹道特性研究[D]. 南京: 南京理工大学, 2016.
[3] 段卓平. 半穿甲弹丸对加筋靶板侵彻的终点弹道的实验和理论研究[J]. 爆炸与冲击, 2005, 25(6): 547–552
DUAN Z P. The experimental and theoretical research for end-point trajectory of warhead penetrating ribbings structural target[J]. Explosion and Shock Waves, 2005, 25(6): 547–552
[4] 屈科佛, 姚勇, 邓勇军, 等. 多层靶板抗不同形状高速破片侵彻性能研究[J]. 兵器装备工程学报, 2020, 41(2): 6–9
QU K, YAO Y, DENG Y J, et al. Numerical study on effect of fragment shape on penetration resistance of multi-layered target[J]. Journal of Ordnance Equipment Engineering, 2020, 41(2): 6–9
[5] 董三强, 蔡星会, 王国亮, 等. 攻角对半穿甲战斗部侵彻航母双层靶板的效应研究[J]. 舰船科学术, 2017, 39(11): 33–37
DONG S Q, CAI X H, WANG Guoliang, et al. Numerical simulation research on effect of warhead penetrating double-layer aircraft carrier targets[J]. Ship Science and Technology, 2017, 39(11): 33–37
[6] 刘润华, 陈国光, 侯飞, 等. 弹丸侵彻陶瓷/钢复合靶板数值研究[J]. 兵器装备工程学报, 2020, 41(3): 183–188
LIU R H, CHEN G G, HOU F, et al. Numerical study of projectile penetration into ceramic/steel composite target plate[J]. Journal of Ordnance Equipment Engineering, 2020, 41(3): 183–188
[7] 熊飞, 石全, 王广彦, 等. 不同侵彻速度下陶瓷复合装甲等效均质钢靶板的建立[J]. 火力与指挥控制, 2014, 40(4): 72–75
XIONG F, SHI Q, WANG G Y, et al. Establishment of equivalent steel target of ceramic compound armor at different projectile’s velocity[J]. Fire Control & Command Control, 2014, 40(4): 72–75
[8] 宋卫东, 宁建国, 张中国, 等. 多层加筋靶板的侵彻模型与等效方法[J]. 弹道学报, 2004, 16(3): 54–59
SONG W D, NING J G, ZHANG Z G, et al. Penetration model and equivalence method of multi-layered stiffener plates[J]. Journal of Ballistics, 2004, 16(3): 54–59
[9] 展婷变, 吕淑芳, 黄德雨. 截卵形弹体正侵彻加强筋结构靶的理论分析[J]. 弹道学报, 2012, 24(1): 52–57
ZHAN T B, LV S F, HUANG D Y. Theoretical analysis on normal penetration of truncated oval-nosed projectile into stiffened plate[J]. Journal of Ballistics, 2012, 24(1): 52–57
[10] 张宁. 均质靶板和加筋靶板抗弹性能的数值模拟研究[J]. 兵器装备工程学报, 2016, 37(2): 30–33
ZHANG N. Numerical simulation for effect of homogeneous and stiffened plates on resisting projectile penetration[J]. Journal of Ordnance Equipment Engineering, 2016, 37(2): 30–33
[11] 王文杰. 高性能先进舰船用合金材料的应用现状及展望[J]. 材料导报, 2013, 6(7): 98–105
WAND W J. The application status and perspective of alloys for high performance and advanced naval vessels[J]. Materials Reports, 2013, 6(7): 98–105
[12] 辛春亮, 薛再清, 涂建, 等. 有限元分析常用材料参数手册[M]. 北京: 机械工业出版社, 2020: 77–78.
