研究穿浪双体船的穿浪首砰击问题的方法包括理论计算、数值预报、试验等，在数值预报中，通常将其简化为船舶跌落模型来计算。SPH和FVM分别是无网格和有网格计算流体中常用的方法。针对船舶跌落问题，采用SPH和FVM分别计算船舶跌落过程船舶的加速度和速度变化，并与试验值进行对比研究。根据数值计算图像及数据，研究2种计算方法在船舶跌落仿真中应用的可行性以及各自的特点。
The methods of the research on slamming of wave-piercing catamaran's wave piercing bow include theory calculation, numerical forecast and experiment. The model of catamaran drop is applied in numerical forecast as a simplified model. SPH and FVM are common methods in meshless and mesh CFD. To analyze the catamaran drop, the change of acceleration and velocity during catamaran drop is calculated on SPH and FVM respectively. The experimental results are also taken into comparative analysis. Based on the calculation image and data, the application of two methods on the simulation of catamaran drop has been researched. The results indicate the feasibility and characteristics of SPH and FVM in the simulation.
2022,44(16): 33-38 收稿日期：2021-08-19
DOI：10.3404/j.issn.1672-7649.2022.16.007
分类号：U661.1
基金项目：山东省船舶控制工程与智能系统工程技术研究中心科研开放专项资金项目（SSCC20200006）
作者简介：刘迪(1989-)，男，硕士，讲师，研究方向为船舶工程技术
参考文献：
[1] THOMAS G, WINKLER S, DAVIS M, et al. Slam events of high-speed catamarans in irregular waves[J]. Journal of Marine Science and Technology, 2011, 16(1): 8–21
[2] SHAHRAKI J R, PENESIS I, THOMAS G, et al. Prediction of slamming behaviour of monohull and multihull forms using smoothed particle hydrodymamics[C]// 9th Symposium on High Speed Marine Vehicles . 2011, 400: 1-10.
[3] THOMAS G, DAVIS M, HOLLOWAY D, et al. Transient dynamic slam response of large high speed catamarans [C]// The 7th International Conference on Fast Sea Transportation, Ischia (Italy).
[4] DAVIDSON G, ROBERTS T, THOMAS G. Global and slam loads for a large wave piercing catamaran design. Australian Journal of Mechanical Engineering 3 (2): 155-164.
[5] AMIN W, DAVIS M R, THOMAS G A, et al. Slamming quasi-static Analysis of an 98m Incat high-speed wave piercing catamaran [C]// International Conference for Innovation in High Speed Marine Vessels. Fremantle, Australia.
[6] 骆寒冰, 徐慧, 余建星, 等. 舰船砰击载荷及结构动响应研究综述[J]. 船舶力学, 2010, 14(4): 439–450
[7] ZHAO R, FALTINSEN O M, AARSNES J V. Water entry of arbitray two-dimensional sections with and without flow separation [C]// Proceeding of the 21st Symposiumon Naval Hydrodynamics, 1996: 408-423.
[8] ENGLE A, LEWIS R. A comparison of hydrodynamic impacts prediction methods with two dimensional drop test data[J]. Marine Structures, 2003, 16(2): 175–182
[9] VON Karman T. The impact on seaplane floats during land in [R]. National Advisory Committee for Aeronatics Techinical note No. 321, 1932: 309−313.
[10] DOBROVOLSKAYA Z N. On some problems of similarity flow of fluid with a free surface[J]. Journal of Fluid Mechanics, 1969, 36: 805–829
[11] SCOLAN Y M, KOROBKIN A A. Three-dimensional theory of water impact. Part1, Inverse Wagner problem[J]. Journal of Fluid Mechanics, 2001, 440: 293–326
[12] FALTINSEN O M, CHE zhi, M. A generalized wagner method for three-dimensional slamming [J], Journal of Ship Research, 2005, 49(4): 279-287.
[13] REDDY D N, SCANLON T, KUO Chengi. Prediction of slam loads on wedge section using computational fluid dynamics (CFD) techniques [C]// 24th Symposium on Naval Hydrodynamics. Fukuoka, Japan, July 2002: 8-13.
[14] YANG S h, LEE H h, PARK T h, et al. Experimental and numerical study on the water entry of symmetric Wedges and astern section of modern container ship [C]// PRADS. Houston, USA, 2007: 518−526.
[15] VEEN D J, GOURLAY T P. A 2D smoothed particle hydrodynamics theory for calculating slamming loads on ship hull sections [C]// International Conference on Marine High Speed Vessels. Fremantle, Australia, RINA: 79-84.
[16] 刘欣. 无网格方法[M]. 北京: 科学出版社, 2011.
[17] LIU G R , LIU M B. Smoothed Particle Hydrodynamics: A Meshfree Particle Method [M]. World Scientific Publishing Co Pte Ltd, 2003.
[18] 王福军. 计算流体动力学分析 [M]. 北京: 清华大 学出版社, 2004: 128.
[19] MENTER F R, KUNTZ M, LANGTRY R. Ten years of industrial experience with the SST turbulence model. [J]. Heat and Mass Transfer 2003, 4: 625-632.
[20] MICHAEL R. D, JAMES R. W. Computation of wet deck bow slam loads for catamaran arched cross sections[J]. Ocean Engineering, 2007(34): 2265-2276.
