为保证船舶零件的契合程度和零件的制造质量，提出基于3D打印的船舶零件高精度设计方法。该方法采用激光扫描仪获取船舶零件的实体点云数据，采用模型特征策略，精简处理获取的船舶零件点云数据；依据该数据，利用扫描实体的表达方式重构船舶零件几何模型；在遵守3D打印约束的前提下，采用熔融沉积成型的3D打印技术打印船舶零件，并基于速度正交分解算法，优化3D打印喷头的扫描路径，提升打印精度，保证零件的高精度设计。测试结果显示：该方法具有良好的点云数据的精简处理效果，表面积变化率均在3%以内；打印的误差结果最大值为−0.022 mm，打印喷嘴在x，y，z三个方向上的误差0.24 mm以下，能够保证船舶零件的高精度设计。
In order to ensure the fitting degree and manufacturing quality of ship parts, a high-precision design method of ship parts based on 3D printing is proposed. The method uses laser scanner to obtain the solid point cloud data of ship parts, and uses model feature strategy to simplify the obtained point cloud data of ship parts; According to the data, the geometric model of ship parts is reconstructed by using the expression of scanning entity; On the premise of complying with the 3D printing constraints, the 3D printing technology of melt deposition molding is used to print ship parts, and based on the speed orthogonal decomposition algorithm, the scanning path of the 3D printing head is optimized to improve the printing accuracy and ensure the precision design of the parts. The test results show that this method has a good effect on the simplification of point cloud data, and the change rate of surface area is within 3%; The maximum error result of printing is −0.022 mm, and the error of printing nozzle in x, y and z directions is less than 0.24 mm, which can ensure the high-precision design of ship parts.
2022,44(17): 181-184 收稿日期：2022-04-25
DOI：10.3404/j.issn.1672-7649.2022.17.038
分类号：TH164
基金项目：江西省高校人文社会科学研究项目(YS21246)；江西省教育科学十四五规划项目(21QN052)
作者简介：魏晞(1988-)，女 ，硕士，讲师，主要从事计算机三维、虚拟现实及艺术设计等研究
参考文献：
[1] 龚海军, 周涛, 李欢, 等. 基于杰魔的铝合金零件逆向建模及压铸模具设计[J]. 铸造, 2020, 69(6): 596–601
[2] 骆建芬, 李孟泽, 李婷, 等. 基于多目标遗传算法的复杂产品设计变更传播优化[J]. 机械设计, 2021, 37(8): 165–168
[3] 谢京玮, 谌炎辉. 基于零件特征单元的零件相似度评价[J]. 组合机床与自动化加工技术, 2021, 28(2): 141–147
[4] 王友利, 刘飞, 董洪全, 等. 基于功能尺寸最短路径的零件尺寸标注模式的设计[J]. 工程设计学报, 2021, 28(2): 141–147
[5] 鲁宇明, 史册, 黎明, 等. 基于改进MOEAD算法的零件加工布局优化研究[J]. 机械设计, 2021, 38(5): 49–56
[6] 王春香, 王耀, 郝志博. 增材制造中基于零件特征的分段自适应分层算法[J]. 工程设计学报, 2020, 27(3): 373–379
