当前位置：首页 > 过刊浏览->2023年45卷7期
船用碳纤维复合材料加筋梁结构强度分析
Structure and strength analysis of marine carbon fiber reinforced composite beams
- DOI:
- 作者:
- 刘志伟, 管义锋, 曹天舒
LIU Zhi-wei, GUAN Yi-feng, CAO Tian-shu
- 作者单位:
- 江苏科技大学 船舶与海洋工程学院, 江苏 镇江 212003
School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
- 关键词:
- 碳纤维加筋梁;弯曲试验;强度分析
reinforced beams with carbon fiber; bending test; strength analysis
- 摘要:
- 为提升碳纤维材料船体结构性能，本文以碳纤船中的连接桥强横梁为研究对象并对其中帽型加筋梁构件进行结构及强度分析。通过研究不同铺层方式对碳纤维帽型加筋梁弯曲性能的影响，运用Abaqus进行数值模拟并与设计试验进行对比。通过对比分析得出：[(0°/90°)]铺层的加筋梁试件具有较高的横向承载能力，因此船体强横梁整体结构强度较高；船用加筋梁构件数值仿真与试验结果较为准确地反应纤维复合材料的刚度退化以及弯曲失效过程，对碳纤维船的建造和应用有一定的指导意义。
In order to improve the structural performance of carbon fiber material hull, this paper takes the strong beam of connecting bridge in carbon fiber catamaran wind power operation and maintenance ship as the research object, and analyzes the structure and strength of cap stiffened beam. By studying the influence of different ply methods on the bending performance of CFRP cap stiffened beams, Abaqus is used to carry out numerical simulation and compare with the design test. Through comparative analysis, it is concluded that: (0°/90°)] The results show that the reinforced beams with laminates have higher transverse bearing capacity; Although there are some errors between the numerical simulation and experimental results of the ultimate bearing capacity of CFRP members, it can accurately reflect the stiffness degradation and bending failure process of CFRP members.
2023,45(7): 47-51 收稿日期：2021-07-15
DOI：10.3404/j.issn.1672-7649.2023.07.010
分类号：U661;TB332
作者简介：刘志伟(1996-),男,硕士研究生,研究方向为混合动力敞口集装箱船结构设计及性能
