当前位置：首页 > 过刊浏览->2023年45卷9期
水下航行器热射流多孔排放口结构仿真分析
Structure simulation analysis of the underwater vehicle thermal jet at discharge multiport
- DOI:
- 作者:
- 高程哲, 杜永成, 杨立
GAO Cheng-zhe, DU Yong-cheng, YANG Li
- 作者单位:
- 海军工程大学 动力工程学院, 湖北 武汉 430000
Academy of Power Engineering, Naval University of Engineering, Wuhan 430033, China
- 关键词:
- 水下航行器;热射流;多孔排放口;仿真分析
underwater vehicle; thermal jet; discharge multiport; simulation analysis
- 摘要:
- 水下航行器动力系统循环冷却水经由排放口排出，与环境水体掺混换热形成热射流。热射流在环境水体中扩散、浮升并在水体表面形成红外特征。为探究排放口结构对水下航行器热射流红外特征的影响，本文采用仿真分析的方法进行研究。依托CFD计算软件平台建立水下航行器运动模型，设计不同数量、不同分布位置的排放口结构并对比热射流红外特征差异，抑制热射流红外特征，提升水下航行器热隐身性能。根据仿真计算结果可知，在排放流量相同的条件下，排放口采用两翼排列方式可以进一步加强热射流温度衰减，降低水面最高峰值温度。
The circulating cooling water of the underwater vehicle power system discharge from the discharge port, mix with the environmental water for heat exchange and form the thermal jet. The thermal jet diffuses and floats in the environmental water and forms infrared characteristics on the surface of the water. In order to explore the influence of the structure of the discharge port on the infrared characteristics of the underwater vehicle thermal jet, this paper uses the method of simulation analysis. Based on the CFD calculation software platform, the motion model of underwater vehicle is established, the number and distribution position of discharge ports are designed to compare the infrared characteristics of thermal jet, suppress the infrared characteristics of thermal jet and improve the thermal stealth performance of underwater vehicle. According to the simulation calculation results, under the condition of the same discharge flow, increasing the number of discharge ports and adopting the symmetrical arrangement of discharge ports can further strengthen the temperature attenuation of thermal jet and reduce the surface maximum temperature.
2023,45(9): 13-18 收稿日期：2022-04-29
DOI：10.3404/j.issn.1672-7649.2023.09.003
分类号：O358
作者简介：高程哲(1998-),男,硕士,主要从事传热、传质、热流体学及其应用方面的研究
