当前位置：首页 > 过刊浏览->2023年45卷9期
大厚度环肋圆柱壳结构应力特性研究
Research on stress property of ring-stiffened cylindrical shell with large-thickness
- DOI:
- 作者:
- 陈沙古1,2, 高原1,2, 吴智睿1,2, 谢晓忠1,2
CHEN Sha-gu1,2, GAO Yuan1,2, WU Zhi-rui1,2, XIE Xiao-zhong1,2
- 作者单位:
- 1. 深海技术科学太湖实验室, 江苏 无锡 214082;
2. 中国船舶科学研究中心, 江苏 无锡 214082
1. Taihu Laboratory of Deepsea Technological Science, Wuxi 214082, China;
2. China Ship Scientific Research Center, Wuxi 214082, China
- 关键词:
- 环肋圆柱壳;大厚度;有限元仿真;应力特性
ring-stiffened cylindrical shell; large thickness; finite element simulation; stress property
- 摘要:
- 环肋圆柱壳是水下工程产品中广泛采用的一种典型耐压结构。随着工作深度需求越来越深，环肋圆柱壳结构设计逐渐呈现出大厚度的新结构特征。本文以某深海无人系统耐压结构参数为例，采用理论方法和有限元仿真方法进行计算分析，研究不同厚度特征参数（t/R）下的环肋圆柱壳结构应力特性。结果表明，基于薄壳理论的解析计算方法不适用于大厚度环肋圆柱壳结构应力计算，大厚度环肋圆柱壳结构的应力特性与传统圆柱壳结构存在较大差异，在大厚度环肋圆柱壳结构设计时应综合权衡其壳板应力和肋骨应力的特性。
Ring-stiffened cylindrical shell is a typical pressure structure widely used in underwater engineering products. A new structural feature of large thickness would be gradually presented in the design of ring-stiffened cylindrical shell with the increasing demand for its working depth. Taking the pressure structure parameters of a deep-sea unmanned system as an example, series of calculation and analysis to study the stress property of ring-stiffened cylindrical shell under different thickness characteristic parameters(t/R) had been carry out using theoretical methods and finite element simulation methods in this paper. The results show that the analytical method based on thin shell theory is not suitable for stress calculation of ring-stiffened cylindrical shells with large thickness. The stress property of the ring-stiffened cylindrical shell with large thickness are quite different from those of the traditional cylindrical shell structure. The property of the shell stress and rib stress should be comprehensively weighed in the design of the ring-stiffened cylindrical shell with large thickness.
2023,45(9): 19-23 收稿日期：2022-12-31
DOI：10.3404/j.issn.1672-7649.2023.09.004
分类号：U661
作者简介：陈沙古(1984-),男,高级工程师,主要从事水下工程结构设计与试验技术研究
