为了满足舰船机动性和直流蒸汽发生器结构特点对给水调节精度的高要求，船用动力装置采用了大-小给水调节阀并联配置的方式。基于大-小给水调节阀的配置和蒸汽过热度模型，本文给出蒸汽过热度的控制系统架构，提出了分程切换控制、开度分解切换控制2种策略。最后采用工程算例对本文提出的控制方法进行了有效性验证，仿真结果表明分程控制方法满足船用动力装置要求。
In order to meet the high requirements of ship's maneuverability and structural characteristics of once-through steam generator for feed-water control accuracy, the marine power plant adopts the parallel configuration of large and small feed valves. Based on the configuration and steam superheat model, this paper presents control system architecture of steam superheat, and proposes two strategies: split-range switching control and opening degree decomposition switching control. Finally, an engineering example is used to verify the effectiveness of the control method proposed in this paper. The simulation results show that split-range control meets the requirements of marine power plants.
2023,45(16): 80-84 收稿日期：2022-8-22
DOI：10.3404/j.issn.1672-7649.2023.16.016
分类号：TP13
作者简介：季晨龙(1988-),男,工程师,研究方向为船舶动力装置
参考文献：
[1] 胡晓杰, 杨婷, 钱虹. 一体化反应堆直流蒸汽发生器控制策略研究[J]. 上海电力大学学报, 2021, 37(2): 115–120
[2] ZHE D, HUANG L. Saturated output feedback dissipation steam temperature control for the OTSG of MHTGRs[J]. IEEE Transactions on Nuclear Science, 2011, 58(3): 1277–1289
[3] 苑源. 一体化反应堆先进协调控制机理及其应用的研究[D]. 上海: 上海电力大学, 2019.
[4] HUANG Y Y, WU W Y, LI L, SUN J H. Identification of steam temperature model for once-through steam generator[C]. CCDC, 2022.
[5] 冯勇军. 分程控制系统分程点计算浅析[J]. 工业仪表与自动化装置, 2019, 4(1): 70–74
[6] 金以慧. 过程控制[M]. 北京: 清华大学出版社, 1993: 32-35.
[7] 陈超. 基于切换策略的航空发动机多目标控制设计[D]. 沈阳: 东北大学, 2019.
[8] 李国进, 李晨曦, 易泽仁. 基于事件触发的船舶航向逻辑切换自适应控制[J]. 舰船科学技术, 2022, 44(11): 76–81
