针对三维反手性拉胀结构在静态压缩载荷作用下变形过程中所反映出的力学性能进行研究，使用3D打印机和FDM熔融沉积制造打印技术制作聚碳酸酯材料的结构模型。使用万能试验机对模型进行静态压缩并全时摄影，得到结构静态压缩的力位移曲线和变形过程。通过Abaqus仿真再现了模型的压缩变形过程，得到结构的应力应变场、位移变形场和变形模式。结果表明，该结构在压缩过程中泊松比数值范围为-0.45～-0.5，压缩强度为6.33 MPa，结构失效是由于中间板连接杆发生断裂破坏产生的，应力最大值出现在斜杆与面板的连接处。
The mechanical properties of three-dimensional backhand stretch expansion structure during deformation under static compression load were studied, and the structural model of polycarbonate was made using 3D printer and FDM melt deposition printing technology. The static compression and full time photography of the model were carried out using a universal testing machine, and the force displacement curve and deformation process of the static compression of the structure were obtained. The compression deformation process of the model is reproduced through ABAQUS simulation, and the stress strain field, displacement deformation field and deformation mode of the structure are obtained. The results show that the Poisson's ratio ranges from -0.45 to -0.5, and the compression strength is 6.33 MPa. The structural failure is caused by the fracture of the connecting rod of the intermediate plate, and the maximum stress occurs at the connection between the inclined rod and the panel.
2023,45(22): 40-44 收稿日期：2022-11-8
DOI：10.3404/j.issn.1672-7649.2023.22.007
分类号：TB34
作者简介：任保冲(1998-),男,硕士研究生,研究方向为负泊松比结构力学特性
参考文献：
[1] LAKES R. Foam structures with a negative Poisson’s ratio[J]. Science, 1987, 235: 1038–1040
[2] 高玉魁. 负泊松比超材料和结构[J]. 材料工程, 2021, 49(5): 38–47
[3] 任鑫, 张相玉, 谢亿民. 负泊松比材料和结构的研究进展[J]. 力学学报, 2019(3): 656–687
[4] QIAO J X, CHEN C. The impact resistance of uniform and functionally giaded auxetic double arrowhead honeycombs[J]. International Jounral of Impact Engineering, 2015, 83:47-58.
[5] BACIGALUPO A, GAMBAROTTA L. Multiscale modeling of periodic chiral cellular materials[C]// 2014.
[6] 黄秀峰, 张振华. 聚脲涂覆三维负泊松比点阵结构的静态力学性能研究[J]. 中国科学: 物理学、力学、天文学, 2021, 51(5): 112–130
[7] 郭春霞, 赵冬, 孙永涛, 等. 正弦负泊松比多孔蜂窝梁平面内三点弯吸能性能实验研究[J]. 应用力学学报, 2020, 37(6): 2404–2409
[8] 朱伟杰, 崔汉国, 何世平. 水下微穿孔板声超材料的几何结构优化[J]. 舰船电子工程, 2020, 40(3): 139–143
[9] 赵昌方, 朱宏伟, 仲健林, 任杰, 马威. 复合材料负泊松比结构力学性能数值研究——拉压力学性能[J]. 江苏师范大学学报(自然科学版), 2020, 38(4): 61–64
[10] 刘宇, 郝琪, 田钰楠, 等. 负泊松比基元蜂窝结构研究[J]. 机械科学与技术, 2021, 40(10): 1629–1635
[11] 张旭苑. 3D打印在结构设计中的应用[J]. 机械工程与自动化, 2021(5): 222–223+226
[12] 冯鹏, 强翰霖, 叶列平. 材料、构件、结构的“屈服点”定义与讨论[J]. 工程力学, 2017, 34(3): 36–46
FENG Peng, QIANG Han-lin, YE Lie-ping. Discussion and definition on yield points of materials, members and structures[J]. Engineering Mechanics, 2017, 34(3): 36–46
[13] 殷晓三. 无明显屈服特征构件屈服点的确定与评价[J]. 地震工程与工程振动, 2019, 39(3): 143–150
YIN Xiao-san. Evaluation and determination methods on yield point of structural components without obvious yield feature[J]. Earthquake Engineering and Engineering Dynamics, 2019, 39(3): 143–150
