本文研究基于计算机的船舶数字化技术，重点分析船舶组合曲线设计方法，给出船舶基于计算机的数字化设计过程，探究船舶分段测试方法。着重介绍全站仪的结构及其在船舶分段测量中的应用，同时对船舶测量数据的配准算法进行研究。最后阐述船舶分段测试的数据处理方法，并结合PID神经网络对本文提出的船舶分段测试的数据处理方法进行分析。
This article studies computer-based ship digitization technology, focusing on analyzing the design method of ship combination curves, and providing a computer-based digital design process for ships; Explored the method of ship segmented testing, with a focus on the structure of the total station and its application in ship segmented measurement. At the same time, studied the registration algorithm of ship measurement data; Finally, the data processing method for ship segmented testing was elaborated, and the data processing method for ship segmented testing proposed in this paper was analyzed using PID neural network.
2023,45(22): 214-217 收稿日期：2023-8-25
DOI：10.3404/j.issn.1672-7649.2023.22.042
分类号：U664.22
基金项目：全国高等院校计算机基础教育研究会2023年度计算机基础教育教学研究项目（2023-AFCEC-427）；武汉船舶职业技术学院2023年院级立项课题（2023z04）
作者简介：黄鋆(1988-),女,硕士,讲师,研究方向为数字媒体及虚拟现实
参考文献：
[1] 黄晓翔, 吕丽平. 船体外形分段测量数据配准技术优化研究与应用[J]. 舰船科学技术, 2021, 43(6): 28-30.
HUANG Xiao-xiang, LV Li-ping. Optimization research and application of data registration technology for hull shape sectional measurement[J]. Ship Science and Technology, 2021, 43(6): 28-30.
[2] 姚明君, 谢菊芳, 王浩君, 等. 基于PLC的船体分段合拢控制系统分析与设计[J]. 湖北大学学报, 2013(35): 79-84.
YAO Ming-jun, XIE Ju-fang, WANG Hao-jun et al. Analysis and design of automation assembling system of large ship subsection based on PLC[J]. Journal of Hubei University, 2013(35): 79-84.
[3] 汪浩, 裴大茗, 王爱民等. 基于虚拟流水的多重约束环境下船体分段车间动态调度[J]. 船舶工程, 2019, 43(41): 128-137.
WANG Hao, PEI Da-ming, WANG Ai-ming et al. Ship block dynamic scheduling under multi-constraints based on virtual flow[J]. Ship Engineering, 2019, 43(41): 128-137.
[4] 李瑞, 张小明, 张帆等. 计算机辅助船体分段吊装强度计算方法及系统开发[J]. 船舶工程, 2014(36): 162-165.
LI Rui, ZHANG Xiao-ming, ZHANG Fan et al. Strength calculation method and system development of computer aided ship block lifting[J]. Ship Engineering, 2014(36): 162-165.
[5] 任晋宇, 徐得志, 吴亮等. 舰艇典型分段焊接工艺仿真及其变形规律分析[J]. 船舶工程, 2020(42): 100-106.
REN Jin-yu, XU De-zhi, WU liang et al. Typical subsection welding process simulation and deformation law of naval vessel[J]. Ship Engineering, 2020(42): 100-106.
[6] 管官, 林焰, 申玫等. 考虑工程约束的船体分段测量点集匹配方法[J]. 哈尔滨工程大学学报, 2013(34): 541-548.
GUAN Guan, LIN Yan, SHEN Mei et al. Point registration algorithm for hull block measurement with engineering constraints[J]. Journal of Harbin Engineering University, 2013(34): 541-548.
