针对国内首艘MARK III 薄膜型LNG运输船（LNG JUMBO）货舱区的结构设计，采用挪威船级社（DNV）开发的 Nauticus Hull和Sesam软件完成舱段结构有限元分析。通过对目标舱加载的计算，校核舱内各主要构件的屈服、屈曲强度；基于子模型技术，评估各关键区域高应力点结构强度，并提出一种高效推算同一位置、不同强框处应力值的线性迭代回归算法，为结构优化与产品轻量化提供了新思路。
The structural design of the cargo hold of China's first MARK III membrane type LNG carrier (LNG JUMBO) was analyzed using the Nauticus Hull and Sesam software developed by the Norwegian classification society DNV. The finite element analysis of the cargo hold structure was conducted by simulating the loading condition of the target cargo. The yield and buckling strength of the major components inside the cargo hold were checked. Using the submodel technique, the structural strength of the high-stress points in critical areas was evaluated. Additionally, a linear iterative regression algorithm for efficiently calculating stress values at different strong frame positions of the same location was proposed, providing a new approach for structural optimization and product lightweighting.
2024,46(8): 37-41 收稿日期：2023-5-15
DOI：10.3404/j.issn.1672-7649.2024.08.007
分类号：U663.2
作者简介：章瑶(1996-),男,硕士,工程师,研究方向为船舶与海洋工程
参考文献：
[1] 王佳颖, 金燕子. 薄膜型LNG 船全船结构屈服和疲劳强度分析[J]. 船舶与海洋工程, 2017, 33(2): 1-9.
[2] 邱吉廷, 李文华. VLGC舱段结构强度有限元分析方法[J]. 船海工程, 2020, 49(1): 61-66.
[3] 张玉奎, 张伟. 230000 m3 LNG FPSO 舱段结构强度分析[J]. 船舶, 2016, 27(5): 48-56.
[4] 杨旭. 油船底边舱下折角结构加强多方案优化设计[J]. 船舶, 2017, 28(3): 26-35.
[5] 朱俊侠. 基于变密度法的VLCC 货舱内横向强框架拓扑优化研究[J]. 船舶, 2019, 30(6): 123-132.
